MuskieFIRST | transducer install lss2 and skimmer » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> transducer install lss2 and skimmer

Message Subject: transducer install lss2 and skimmer

olddog

Posted 6/28/2014 8:29 AM (#718198)
Subject: transducer install lss2 and skimmer

Posts: 29

I am installing a lss2 and skimmer transducer on 14ft aluminum ,the bottom of boat is prety well flat and the instructions say to keep the lss2 aprox 1/16 below bottom,Should i drop the lss2 a little lower and put the skimmer flush

VMS

Posted 6/28/2014 5:28 PM (#718246 - in reply to #718198)
Subject: Re: transducer install lss2 and skimmer

Posts: 3508

Location: Elk River, Minnesota

Hiya,

I would say mount them as per instructions. Both need to be running in "clean" water so determining mounting location is important... Be watch Gil of rivet lines on the main stringers of the hull running the length. Otherwise it should be pretty straight forward.

Steve

Macintosh

Posted 6/29/2014 6:48 AM (#718280 - in reply to #718198)
Subject: Re: transducer install lss2 and skimmer

Posts: 117

You can use a board or something clamped onto the transom to test several mounting locations--especially for the lss ducer you will almost certainly need to play around with mounting it to avoid having the view blocked by the engine lower unit, etc.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread