MuskieFIRST | Cutting Lexan Lips » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: Its a F***ing catfish!! Me after hooking a catfish on DCG 10's, 10 minutes into the Iowa tournament.
- (Added by: TTails)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Cutting Lexan Lips

Message Subject: Cutting Lexan Lips

greenhyena

Posted 8/12/2013 4:35 PM (#657007)
Subject: Cutting Lexan Lips

Posts: 240

Location: Oconomowc, WI

Just wondering what the best way to cut lexan is. I know a lot of guys have them cut with water, but I'm just looking to do a few at home. Was thinking a jig saw with a fine tooth blade. Thanks.

MartinTD

Posted 8/13/2013 1:35 PM (#657169 - in reply to #657007)
Subject: Re: Cutting Lexan Lips

Posts: 1141

Location: NorthCentral WI

Yea, it can be kind of a pain. Jigsaw with a plexiglass blade or a scroll saw has worked for me. Then use belt sander or a file to finish.

Kenslures

Posted 8/13/2013 8:23 PM (#657249 - in reply to #657007)
Subject: Re: Cutting Lexan Lips

Posts: 235

What style lips are you using?? Rounded ones or the square type? I cut mine on a table saw and use a fine toothed plywood blade. Use extreme caution but it does a great job and no sanding. I made a jig to hold the pieces to cut the back slanted edges. I can post a picture if your interested. Ken

greenhyena

Posted 8/14/2013 11:55 AM (#657362 - in reply to #657007)
Subject: Re: Cutting Lexan Lips

Posts: 240

Location: Oconomowc, WI

Yeah, if you don't mind putting the pic up that'd be great. I figured I'd just start with square lips since it'll be easier than the rounded.

kodiak

Posted 8/14/2013 1:29 PM (#657383 - in reply to #657007)
Subject: Re: Cutting Lexan Lips

Posts: 1224

Location: Okoboji

router with good bit

Kenslures

Posted 8/14/2013 6:32 PM (#657435 - in reply to #657007)
Subject: Re: Cutting Lexan Lips

Posts: 235

I'll post the pictures soon. I'll be gone for a few days but I will get them up for you. Ken

klcb

Posted 8/15/2013 10:00 PM (#657656 - in reply to #657007)
Subject: RE: Cutting Lexan Lips

Posts: 30

straight edge and scar it with something sharp then it will snap where you make the marks.then sand your edges!lowes sells the scaring tool,not expensive.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread