|
|
Posts: 50
| Has anyone had any problems with the roller clutch assembly popping out of the side of the reel?I have a 400a and 401a and both have the same problem right out of the box.Only used each one about 10 minutes.The whole handle assembly pops out and wobbles.Don't want to send back unless its a hard problem to fix.Thanks! |
|
| |
|
Posts: 143
Location: Palatine, IL | I have 3 years on my 301 with no issues. |
|
| |
|
Posts: 209
Location: Big Falls MN | I have some that are 5 years old and never an issue I have both the 400 and the 300
|
|
| |
|
Posts: 959
| Yep. Had 3 in a row do the same thing- Sent them all back all 3 broke within 8 hrs of use.
Jeff Hanson
madisonmuskyguide.com |
|
| |
|
Posts: 553
Location: 15 miles east of Lake Kinkaid | I had the same problem as well. Went to Calcuttas and have not looked back in 5 years. |
|
| |
|
Posts: 209
Location: Big Falls MN | I have some cardiffs out last a few of my calcuttas b and te pulling dbl 10 and big rubber |
|
| |
|
Posts: 149
| I have one i bought from an online auction. Had that same problem and sent it to PIKEMASTER. He fixed it, lubed it, (pimped it?) and it's better than new. Cost of the reel + pimping = less than price of a new one. Worked out well for me. |
|
| |
|
Posts: 339
Location: Denmark | Do you have a picture, showing us how this looks like?. Normally most multiplier reels have a slight horizontal play, nothing to worry about. |
|
| |
|
Posts: 2051
| My experience was the same as Jeff Hanson's, thankfully I only had one though - if someone wants one for parts shoot me a pm... |
|
| |
|
| Found a quick easy fix two tiny washers and two slightly longer scews.there are two small screws next to the handle housing that pops out of the main body if you take these screws out one at a time and put a washer and a slightly longer screw to acomendate for thickness of washer it holds that insert in the main body. I took a old real apart and used those screws. The problem is the main shaft handle has a c clip at the end of it the price inside of the real that the shaft secures to is plastic which flexes when realing. You can also put a small washer there to reduce shaft end play. But requires taking real apart I don't know how to put pictures on here |
|
| |
