Muskie Discussion Forums
| ||
| Moderators: Slamr | View previous thread :: View next thread |
| Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Custom Leaders |
| Message Subject: Custom Leaders | |||
| MuskieFever |
| ||
Posts: 572 Location: Maplewood, MN | I've been going back and forth a lot recently with what style leaders I use. So my question is, what leader do you use? Do you make your own? If so, do you tie direct to the line or use a swivel, etc... | ||
| lpeitso |
| ||
Posts: 633 | I buy some from Thorne's, but I have also made my own 7 strand leaders. I like the Nylon coated wire instead of regular 7 strand. I like the Stringease Stay-Lok Snaps, and the Dual rotating Ball Bearing swivels from Thorne's. For Jerkbait's I have used the O-ring, and 174# Piano wire. I think for some Larger baits I am going to just use Split Rings instead of snaps. Lance | ||
| simple minded |
| ||
| SS wire, stringease snaps, ball bearing swivels I've built and used a lot of leaders with all the usual kinds of material and hardware but I"m back to the basics and keeping it real simple: casting big weagles -- 8" cowgirl wire -- #4.5 stringease snap shrink tubed to one end, line tied direct to loop at other end casting almost everything else -- 10" cowgirl wire, #4.5 stringease snap one end, ball bearing swivel other end casting dainty stuff (eg 6" Jake, Long A) -- 10" 0.029 wire, #4 stringease, bb swivels | |||
| MuskieFever |
| ||
Posts: 572 Location: Maplewood, MN | Any pictures? I've been trying the hybrid leader system but so far haven't set the hook yet. It looks good but I might take it off because the uni to uni makes me nervous. | ||
| Guest |
| ||
| here is my no1 leader,really tuff and price is right http://huskiemuskie.ca/?page_id=5 | |||
| simple minded |
| ||
| pretty much similar to the "stainless steel jerk bait leaders" Guest makes. Check out his link, they look topnotch. | |||
| PIKEMASTER |
| ||
Location: Latitude 41.3016 Longitude 88.6160 | Call John from Stealth Tackle 708 466 5066 he can make whatever U are looking for. Most Guides use his leaders they are some of the best. | ||
| mtcook16 |
| ||
Posts: 546 Location: MN | I started to make some of my own with 49 strand wire. It's a 7x7 weave that is very flexible and hardly kinks at all. For jerkbaits and gliders I run a straight, single-strand wire leader without a swivel on the front. I found that the swivel inhibits the bait's action otherwise. http://www.cabelas.com/product/American-Fishing-Wire-Strand-x-Leade... | ||
| edalz |
| ||
Posts: 458 | PIKEMASTER - 7/10/2013 8:43 AM Call John from Stealth Tackle 708 466 5066 he can make whatever U are looking for. Most Guides use his leaders they are some of the best. I only use Stealth leaders and John does great work. | ||
| Jump to page : 1 Now viewing page 1 [30 messages per page] |
| Search this forum Printer friendly version E-mail a link to this thread |


Copyright © 2026 OutdoorsFIRST Media |