MuskieFIRST | Running Cables » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Running Cables

Message Subject: Running Cables

Hop

Posted 6/3/2013 7:09 PM (#644691)
Subject: Running Cables

Posts: 100

Anyone have any input on running cables/wire from rear of Ranger 618VS to the console? I assume it is fairly easy to fish stuff through. Just looking for ideas or any helpful hints to make the job easier. Thanks

VMS

Posted 6/3/2013 7:58 PM (#644700 - in reply to #644691)
Subject: RE: Running Cables

Posts: 3508

Location: Elk River, Minnesota

Hiya,

If you can find a pathway to do it, I would suggest using a plumbers fish wire that you would use to clear drain clogs. I have used mine to run wire quite a bit as I have added many items to my rig over the years (not a 618, but running wires in general)

Steve

Nolan

Posted 6/3/2013 8:50 PM (#644712 - in reply to #644691)
Subject: Re: Running Cables

Attach a piece of string to the old transducer, pull it out the back, then tie on new transducer to string, pull back through the console. Worked great for me!

Hop

Posted 6/4/2013 7:42 AM (#644749 - in reply to #644691)
Subject: RE: Running Cables

Posts: 100

Thanks for the input.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread