Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Lures,Tackle, and Equipment -> Low profile reels
 
Message Subject: Low profile reels
ToothyCritter
Posted 3/12/2013 1:01 PM (#625610)
Subject: Low profile reels





Posts: 661


Location: Roscoe IL
What the difference between the Revo Toro Winch 60 and the 61? I must have a left hand retreive and want a multi purpose reel for DBL 10's and mag dogs. I just picked up 2 barely used 9' Hammers and need to put reels on them.

Also considering the Shimano Curado 300E. Any insight or advise would help!

Thanks,
Mike
anzomcik
Posted 3/12/2013 1:14 PM (#625616 - in reply to #625610)
Subject: Re: Low profile reels





Posts: 531


61 is left hand crank. and curado 301 is left hand as well.
60 and 300 are right handed crank
Ford vs chevy on the toro and curado. Both good, asking which is better always starts a fight
ToothyCritter
Posted 3/12/2013 1:37 PM (#625627 - in reply to #625610)
Subject: Re: Low profile reels





Posts: 661


Location: Roscoe IL
Ahhhh HA! Thanks for the information. Let the fight begin, I drive a ChevyTahoe and wish I had a F250 diesel crew cab! But $50k is just plain nuts!
wicked
Posted 3/12/2013 2:26 PM (#625645 - in reply to #625610)
Subject: Re: Low profile reels




Location: sneaking out to get on the water ;-)
The winch is geared lower and is awesome for big blades but might be a bit slow for the mag dawgs. The 300e is more comparable to the revo toro 5.4:1 .
Average Joe
Posted 3/13/2013 2:03 PM (#626123 - in reply to #625645)
Subject: Re: Low profile reels





Posts: 265


Location: Hudson,WI
Curado EJ for small blades and top water.

I like my Revo Toro Winch, but they're a bit to slow for 10's. They do work pretty well for Super Models though.
Ja Rule
Posted 3/13/2013 3:05 PM (#626152 - in reply to #625610)
Subject: Re: Low profile reels




Posts: 415


The curado and revo toro winch can't really be compared. Both are sweet reels, but are made for different uses. The curado is better for smaller baits and baits that don't pull as hard due to its higher gear ratio. The winch handles 10's nicely and other hard pulling baits but it isn't the greatest for "burning" 10's.
ToothyCritter
Posted 3/13/2013 3:10 PM (#626156 - in reply to #626152)
Subject: Re: Low profile reels





Posts: 661


Location: Roscoe IL
What would be considered the best low profile reel avaialble for 10's and hard pulling baits? Keep in mind, that I must use a left hand retreive. I cannot get used to RHR.

Thanks,
Mike
CU301DSV
Posted 3/13/2013 6:20 PM (#626233 - in reply to #626156)
Subject: Re: Low profile reels





Posts: 906


Location: Canada
edit : Abu Garcia 61 Revo Toro Winch 4.6:1

cave run legend
Posted 3/13/2013 7:11 PM (#626258 - in reply to #625610)
Subject: Re: Low profile reels





Posts: 2097


I used the 6:4:1 on a double 10 last fall and put it away after three cast.
CU301DSV
Posted 3/13/2013 7:42 PM (#626267 - in reply to #626258)
Subject: Re: Low profile reels





Posts: 906


Location: Canada
cave run legend - 3/13/2013 8:11 PM

I used the 6:4:1 on a double 10 last fall and put it away after three cast.


Edited my above post, I meant 4.6:1. I do use the 6.4:1 on my glider rod.
enice
Posted 3/13/2013 8:25 PM (#626276 - in reply to #626156)
Subject: Re: Low profile reels




Posts: 50


I'd see if you could find a Revo Toro 61 on Ebay for a reasonable price. They are a 5.4:1 gear ratio which is in my opinion the most versatile gear ratio. Good for hard pulling baits, and enough line pickup for jerk baits. Abu Garcia also has the Revo Toro NaCl in a lefty model with a 5.4:1 ratio but it's 300$.
tundrawalker00
Posted 3/13/2013 8:48 PM (#626281 - in reply to #625610)
Subject: Re: Low profile reels




Posts: 504


Location: Ludington, MI
I like my Revo 61 for big blades but my reel guy put a Daiwa power handle on it that's a little longer. I think it's perfect. I can run blades or anything else I want.
ToothyCritter
Posted 3/14/2013 9:31 AM (#626392 - in reply to #626281)
Subject: Re: Low profile reels





Posts: 661


Location: Roscoe IL
For Muskies would the Toro 61 4.6:1 be a better choice than the Toro NaCi 61 5.4:1 then?
Jason Bomber
Posted 3/14/2013 9:43 AM (#626397 - in reply to #626392)
Subject: Re: Low profile reels





Posts: 574


ToothyCritter - 3/14/2013 9:31 AM

For Muskies would the Toro 61 4.6:1 be a better choice than the Toro NaCi 61 5.4:1 then?


That 5.4:1 is a better all around reel.. Should handle 10s fine with the power handle, and wont feel too slow using other baits..
tundrawalker00
Posted 3/14/2013 9:45 AM (#626398 - in reply to #625610)
Subject: Re: Low profile reels




Posts: 504


Location: Ludington, MI
It's gonna be what you like. I got a higher speed Lexa and I don't care for it in part because it's so fast that I had to re-learn WTD baits and how to feed line back to them. I like 5.4s best.
pamuskyhunter
Posted 3/14/2013 9:46 AM (#626399 - in reply to #626392)
Subject: Re: Low profile reels





Posts: 613


Location: big cove tannery pa

ToothyCritter - 3/13/2013 10:31 AM For Muskies would the Toro 61 4.6:1 be a better choice than the Toro NaCi 61 5.4:1 then?

Two different reels. The 4:6.1 is good for throwing double 10's but you will wear yourself out burning them. The NACL has an even longer power handle now that does work very well for double blades and the 5:4.1 will still tire you out burning but not as bad as the 4:6.1. Learn to use a right hand reel and get a saltist 30 if you wanna burn them.

ToothyCritter
Posted 3/14/2013 10:07 AM (#626407 - in reply to #625610)
Subject: Re: Low profile reels





Posts: 661


Location: Roscoe IL
Thanks for everyone's help! I'm pulling the trigger on the NaCl today. When the saltist is available in LHR, I'll look at them if I'm looking for another new reel.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)