Muskie Discussion Forums
| ||
| Moderators: Slamr | View previous thread :: View next thread |
| Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Buy , Sell, and Trade -> Two Calcutta 401TEs |
| Message Subject: Two Calcutta 401TEs | |||
| MikeD |
| ||
Posts: 5 | Both are perfect mechanically, and just got the full strip, break down, clean and lube. I have boxes, papers, etc. for both reels. One has carbontex drag and bearing upgrade. Very little boat rash at all. a few light scratches on the palm side plate and that's it. I'd call it a 9/10 cosmetically. The other has stock drag and bearings. A little more rash on the palm side plate than the other. I'd call it an 8.5/10 cosmetically. A few additional mods done to both reels to improve performance a bit. The drag click pin assembly has been removed from both. And a few key spots have been polished. You will get the stock drag washers, the click pins and springs (BNT2122, BNT 2123), a spare handle nut (BNT2747), and a brand new set of the plastic gears that drive the level wind/spool assembly on a cast (BNT1703, BNT2733) I'd prefer to sell these two together. If you're interested in only one, feel free to contact me as well. Asking $600 for the pair and everything included. I realize I've never posted here. I've read the site for a while, but since I now live in Texas I don't do a lot of muskie fishing... I'd understand if y'all are hesitant to deal with me, having no previous posts, but I will provide references, feedback, etc. if you'd like. Thanks, Mike | ||
| Pouyan1 |
| ||
Posts: 3 | Are they right hand or left hand | ||
| Jeff78 |
| ||
Posts: 1660 Location: central Wisconsin | 401 is a lefty. 400 is a righty. | ||
| MikeD |
| ||
Posts: 5 | Yep, left handed. The only reason I've listed these two for sale is that after I got my first 401D, I realized there are a couple of small things I like more about that reel than the TE. The TE is still a little more refined and nicer reel in my opinion, but I actually prefer the disengaging level wind, and don't mind the fact that the brakes are hidden. I just thought if I could, I'd sell a couple of TEs and replace them with Ds. | ||
| muskyhunter47 |
| ||
Posts: 1638 Location: Minnesota | ill take your upgraded one for 300 if you want to break up the set | ||
| MikeD |
| ||
Posts: 5 | Reel with drag and bearing upgrades has been sold. Still have the other. I have pictures I can send you. Just send me a PM and ill give you my email and phone number. Thanks. | ||
| MikeD |
| ||
Posts: 5 | Both sold. Thanks | ||
| Jump to page : 1 Now viewing page 1 [30 messages per page] |
| Search this forum Printer friendly version E-mail a link to this thread |


Copyright © 2026 OutdoorsFIRST Media |