MuskieFIRST | Toro Winch questions » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Toro Winch questions

Message Subject: Toro Winch questions

BuckeyeAl

Posted 4/1/2012 1:30 PM (#549942)
Subject: Toro Winch questions

Posts: 55

I'm new to musky fishing and had two questions about Toros.

1. The power handle or the regular handle?

2. How the H**l do you change to the power handle? I've removed the small screw but I can't get the cap or cover off the nut.

Al

Killerbug

Posted 4/1/2012 2:15 PM (#549950 - in reply to #549942)
Subject: RE: Toro Winch questions

Posts: 339

Location: Denmark

Just losen it with a knife blade, it should pop of after removing the screw.

http://img822.imageshack.us/img822/8326/dsc0344d.jpg

muskie! nut

Posted 4/1/2012 3:32 PM (#549966 - in reply to #549942)
Subject: Re: Toro Winch questions

Posts: 2894

Location: Yahara River Chain

1) Depends on what you like. They both have the same throw so you don't get an advantage with one over the other handle.

2) Like was said use a blade or you sometimes turn the reel over and gently tap it on the table.

BuckeyeAl

Posted 4/1/2012 6:26 PM (#549996 - in reply to #549942)
Subject: RE: Toro Winch questions

Posts: 55

Thanks! That was really simple. Believe it or not, I used to design tooling and plan manfacturing processes for a metalworking company I owned I in Ohio. Guess I'm losing a little bit......

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread