MuskieFIRST | Speed up my Revo » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Speed up my Revo

Message Subject: Speed up my Revo

FastonH2o

Posted 2/3/2012 3:31 PM (#536581)
Subject: Speed up my Revo

I bought a Revo Toro Winch 60 a couple years ago and never liked it because the 4.6:1 gear ratio was just too slow for throwing DCG's. I contacted Abu Garcia to find out if they offered a gear kit to increase the speed to 5.2:1 and I'm happy to find out that they do, though it is not sold as a kit but sold as a number of parts. I have also added on a power handle and look forward to receiving these parts to upgrade my reel. If all works out well I have a nice seat ready for it on a newly purchased Thorne Brothers 9' XH Predator rod.
Has anyone out there attempted to speed up their Revo? Anything unusual that I should be prepared for?

Schuler

Posted 2/3/2012 6:42 PM (#536623 - in reply to #536581)
Subject: Re: Speed up my Revo

Posts: 1462

Location: Davenport, IA

I changed one of my Revo STX's that I use for bass from 6.4:1 to 5.4:1. It was just changing the main gear and pinion gear. The process is very simple if you take your reels apart to clean them anyway. The price was not too bad and its great for deep cranks.

muskie! nut

Posted 2/3/2012 6:47 PM (#536626 - in reply to #536581)
Subject: Re: Speed up my Revo

Posts: 2894

Location: Yahara River Chain

I was thinking of speeding up a 5.4:1 (not 5.2) to a 6.4:1. I still might as I have two 5.4s.

bigbite

Posted 2/3/2012 10:09 PM (#536661 - in reply to #536581)
Subject: RE: Speed up my Revo

Posts: 1348

Location: Pewaukee, WI

I've changed the gearing in my Toro Winch as well. I had Richard Schmitz (PikeMaster from this site) do it while servicing the reel. I'm with you on stepping up the retrieval speed and at 5:4.1 that is a good all around speed to handle most baits.

PIKEMASTER

Posted 2/4/2012 12:10 AM (#536667 - in reply to #536581)
Subject: Re: Speed up my Revo

Location: Latitude 41.3016 Longitude 88.6160

Just make sure you order the right set of gears, look at the # on the bottom of the reel seat, ABU has 2 different gears sets for the Toro reels. Also sometimes you have to replace the pinion holder on some gears sets. Pm me if you need help.
Cost $50.00 plus from ABU with shipping and tax.

FastonH2o

Posted 2/10/2012 6:04 PM (#537994 - in reply to #536581)
Subject: RE: Speed up my Revo

Mission accomplished! New gears are in and now I await for the first cast. If any one is interested in speeding up their Revo you will need the following parts:
1144228 Drive Gear
1144227 Pinion
1125753 Yoke
1144198 Drag Washer (3 ea.)
1144199 Drag Washer
1144200 Drag Washer
1144201 Pressure Washer

CU301DSV

Posted 2/10/2012 6:21 PM (#537996 - in reply to #537994)
Subject: RE: Speed up my Revo

Posts: 906

Location: Canada

FastonH2o - 2/10/2012 7:04 PM

Mission accomplished! New gears are in and now I await for the first cast. If any one is interested in speeding up their Revo you will need the following parts:
1144228 Drive Gear
1144227 Pinion
1125753 Yoke
1144198 Drag Washer (3 ea.)
1144199 Drag Washer
1144200 Drag Washer
1144201 Pressure Washer

From Winch to what speed? Thanks

FastonH2o

Posted 2/10/2012 6:41 PM (#537997 - in reply to #536581)
Subject: RE: Speed up my Revo

4.6:1 to 5.4:1.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread