|
|
Posts: 216
Location: Middletown, Ohio | I recently joined a local muskie club here in SouthWest Ohio and one of the members told me about this site and said I should share some of my work. From what I've seen, there's a bunch of talented guys on here ! Here are a couple of my recent creations:
http://muskie.outdoorsfirst.com/board/photos/photo-thumbnails.asp?a...
Hope you like em'
Mark
Edited by FUBAR 1/26/2011 1:40 PM
|
|
| |
|
Posts: 908
Location: South-Central PA | Wow, nice stuff. What are the dimensions and weights?
jeremy |
|
| |
|
Posts: 615
Location: Madison, WI | FUBAR,
Very impressive, Like BH, interested in the specs. The clear is beautiful, what type did you use E-tex?
MS |
|
| |
|
Posts: 216
Location: Middletown, Ohio | Thanks for the comments guys. E-tex is the topcoat that I'm using over Createx and Polytranspar colors.
Here's the weights and lengths :
BlueGill 5 1/4" long 2.85 ounces w/o hooks and split rings
Striper 7 3/4" long 2.85 ounces w/o hooks and split rings
Red/white bait 7 1/4" long 1.5 ounces w/o hooks and split rings
Carp 7 3/4" long 3.40 ounces
That pretty much sums it up. I've tried the carp colored bait (before everything iced over) and it sinks at about a rate of 1.5 feet per second. Everything is still in the trial an error phase as far as the ballast is concerned, but I think I have a good handle on the paint jobs.
Mark |
|
| |
|
Posts: 392
Location: KY | Wow! Nice stuff. I really like the colors and the finishes are flawless.
Edited by BruceKY 1/26/2011 7:22 PM
|
|
| |
