Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )

Random quote: Muskies are nasty. They stink. They taste bad. They are hard to catch and will disappoint even the most devoted angler. The lures required cost more than some women's jewelry. The rods and reels require a remortgage of the house. The boat is always worth more than the tow vehicle. Sure beats the hell out of golf.
- (Added by: sworrall)

Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Spray can painting
 
Message Subject: Spray can painting
Juhas
Posted 8/15/2010 5:21 PM (#455282)
Subject: Spray can painting


Painted a couple of baits today and noticed some splattering overspray from the darker colors. Was using the 2x Rustoleum. Do the smaller cans of auto touch up paint splatter less?
Chris
Musky Madman
Posted 8/16/2010 10:30 AM (#455380 - in reply to #455282)
Subject: Re: Spray can painting


In my experience, No. Spray cans work fine and can actually do a pretty nice paint job. However, overspray is 20X worse than an airbrush. Therefore, it is important to make sure anything you don't want painted is masked.
Tackle Industries
Posted 8/20/2010 7:59 AM (#455978 - in reply to #455282)
Subject: Re: Spray can painting





Posts: 4053


Location: Land of the Musky
I used to paint all of my Grunts with Rustoleum and it worked great. You just need to get the feel for how the can's spray. I had to use very fast motions to get a very nice look and I was also very anal about making sure my tips were clean after each use. Just turn the can upside down and hit the button for 3 seconds to get the paint out. You can do this a few times and then the tip is trashed on those. Main things is, use a can as much as you can the first time and you will get the best results. Air brush is the best.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)