MuskieFIRST | Spinner Blades » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: "NO REDD! NOOOO!!!!" as Beav spies his 6 month old lab using his rear deck for a feces facility.
- (Added by: Beaver)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Spinner Blades

Message Subject: Spinner Blades

markw

Posted 3/31/2010 9:47 AM (#432140)
Subject: Spinner Blades

Posts: 35

Location: Apple Valley, MN

I want to make up some bucktails and I'm curious if there is a performance difference when comparing thin blades (.018 or .025) to thick blades (.041). I've seen Colorado and Indiana blades that have a thickness of .017, .018, .025, and .041. My guess is the thicker blades may be a bit more durable, but do thin blades spin or act differently than thick blades due to the added weight? What thickness do most of you use?

ttrap

Posted 3/31/2010 10:20 AM (#432146 - in reply to #432140)
Subject: Re: Spinner Blades

Posts: 279

The thinner blades have a wider rotation where the thicker ones have a tighter rotation on the wire so the thinner blades will rise higher in the water column. The thinner ones will pull harder than the the thicker ones due to the wider rotation. I'm sure there is some other things that others will share.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread