|
|
Posts: 1316
Location: Lebanon,Mo | Just curious if you can get a power handle for this model.I think it's avaliable on the TE400,but not for sure about the 400B.Thanks ... |
|
| |
|
Posts: 4053
Location: Land of the Musky | He Fred. Shoot me a picture of your current handle next to a ruler. I can take a picture of my power handle for my 400TE for you next to a ruler. Bet you can get a good idea if it will fit or not. PIKE MASTER may also know. You can also call Shimano parts and they will know.
James
[email protected] |
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | The power handle off the CT400BSV will fit your 400B, call Shimano at 1-877-577/0600, also order the nut and washer and screw for the power handle. The P/H for the 400TE will not fit on the 400B. |
|
| |
|
Posts: 344
Location: Musky Country | I have 2 400b's both with Power handles on them. |
|
| |
|
Posts: 130
Location: Chicago | Hey Fred, I put Shimano power handle with the rubber knob on mine, when first started casting with it, the extra weight of the handle was tripping the clutch. After a bunch of time searching the web (tackletour.com) I remedied by replacing the clutch pawl spring and retractor spring as suggested by Shimano tech now it works well. The wooden (knob) power handle is a little lighter that may be an option if you don't want the hassle of opening the reel up. Good Luck! |
|
| |
|
Posts: 309
Location: Elgin IL | I have the wood knob and I still had the problem of tripping the clutch.I replaced the clutch pawl spring and retractor spring as suggested by Shimano tech but have not tried it yet.
Attachments
----------------
 power handle_1_1.JPG (28KB - 343 downloads)
|
|
| |
|
Location: Latitude 41.3016 Longitude 88.6160 | Take the clutch pawl and the retractor springs that Shimano sent you to a reel repair center and try to get a stronger set ??? The 400B and the 400TE use the same BNT1223 retractor sring but the clutch springs are different Also watch that you don't trip the handle when you are casting. I cast overhand and face the handle side a little upright when casting. I have 4 400TE reels and they handle a P/H fine.
Edited by PIKEMASTER 5/20/2008 10:21 AM
|
|
| |
