|
|
Posts: 531
Location: Hugo, MN | I have yet to find an LED replacement set of tail lights that are the same dimensions as the original lights on my Shorelander. Has anybody found some that fit? Seems like there's only two styles: square and low profile. |
|
| |
|
Posts: 2323
Location: Stevens Point, WI | Can you take a pic of your lights? There are a lot of different kinds but I think I can find one for you. Throughout the years I've had to replace just about every light on my past Shorelandr Trailers. |
|
| |
|
| I got mine from a ebay store. I think it was truckandtrailerleds. They are the only ones I could find that had the right size. Hope this helps |
|
| |
|
Posts: 531
Location: Hugo, MN | Thought I'd bring this up again as I need to replace these brake lights before I tow again in spring. Seems the last time out the ice at the ramp was a bit thicker than anticipated and both lights exploded upon entry. Oh well, tired of changing bulbs anyway. I measured the old lights and they're basically 4" by 7"wide. I have yet to find anything close. Anybody else replace this style? |
|
| |
|
Posts: 2323
Location: Stevens Point, WI | Here is one link. This is where I got replacement light covers when I too had a Shorelandr trailer. If you still can't find them, I'd go to a local marina that sells Shorelandr trailers and have them look them up. Otherwise, call Shorelander yourself, they can take care of you too. It would be quite easy for them. Just get the serial number off the trailer and they can look them up.
http://shop.easternmarine.com/index.cfm?fuseaction=catalog.catalog&... |
|
| |
|
Posts: 314
Location: Bristol, IN | www.shorelandr.com
1) Have your VIN # handy.
2) Go to this site, click on Owners in top right beneath the search box.
3) Service & Parts.
4) Parts Lookup.
Contact Us
Questions? Comments? Would you like us to mail you a brochure?
E-mail us
Write us:
Midwest Industries, Inc.
102-122 East Hwy. 59 & 175
Ida Grove, Iowa 51445
Call us:
(800) 859-3028
Monday - Friday,
8 a.m. - 5 p.m. Central Time
Fax us: (712) 364-3361
Edited by MuskyTaleMike 12/13/2008 7:39 AM
|
|
| |
|
Posts: 67
Location: St. Germain, Wi | Wesbar makes a 4x6 inch led light set. |
|
| |
|
Posts: 388
| I put a set of Peterson Pihranna 941's on my Shorelander. They have another set that looks like it would match the wider profile of a shorlander trailer also. The 941's work great. unfortunately I broke the lenses backing my trailer through ice at the boat landing this fall. The lights still work though. Link is below.
http://www.pmlights.com/products.cfm?cId=1&fId=62 |
|
| |
|
Posts: 8
| http://www.wesbar.com/Lights/pdfs/Ceq-Lights-pgs06-35-08.pdf
Page 8 --- close, 4x6 may work for you
Edited by Blue Pike 12/27/2008 5:55 AM
|
|
| |
|
Posts: 531
Location: Hugo, MN | The problem is that the 4" by 6" lights will be an inch too narrow, and leave the frame behind it exposed. I just don't want it to look like the lights don't belong on the trailer. |
|
| |
|
Posts: 5874
| Have you called your SHorelander dealer? Or Shorelander directly? They should be able to help you out here. |
|
| |
|
Posts: 531
Location: Hugo, MN | I found out that Shorelander doesn't make an LED replacement in my size, and that the Wesbar 4"x6" will actually look OK, so I guess I'll be ordering them soon. Thanks for the help. |
|
| |
