MuskieFIRST | boat cover supports » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> boat cover supports

Message Subject: boat cover supports

Bruce

Posted 3/13/2008 9:21 AM (#307161)
Subject: boat cover supports

Posts: 57

Anyone rig there own supports from pvc pipe or did you just bite the bullet and spend$$$ on fiberglass bows??? I have an open aluminum and dont want to drill into the gunnell if I can get away from it. Dont want anything protruding that one might hit their hand on. Any ideas would be appreciated.

KARLOUTDOORS

Posted 3/13/2008 12:48 PM (#307200 - in reply to #307161)
Subject: RE: boat cover supports

Posts: 956

Location: Home of the 2016 World Series Champion Cubs

Perhaps you may have rod holder bases mounted on/near the perimeter of your boat that can serve double duty with the holders as well as the glass bows.
Karl

Bruce

Posted 3/13/2008 10:17 PM (#307361 - in reply to #307161)
Subject: Re: boat cover supports

Posts: 57

How bout this. 3/4" pvc pipe with t's on each end. Cut away a section of those t's so it looks like a 'c' from the end. The 'c' would rest on the gunnel. I hope to find a larger dia pipe that would have adapters to step it down to the 3/4" size. Did i do good?

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread