MuskieFIRST | slammer repair » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> slammer repair

Message Subject: slammer repair

jpine

Posted 10/15/2007 6:10 PM (#279672)
Subject: slammer repair

Posts: 90

Location: ne53

The lip on my 7'' deep diving slammer is loose.

What glue has worked for those who have made this type of repair?

mountainmuskies

Posted 10/15/2007 6:13 PM (#279675 - in reply to #279672)
Subject: RE: slammer repair

Posts: 808

I've never had to repair a slammer, but I would imagine super glue would work well. After gluing it back in also put a little clean nail polish around the lip and over where the glue is to protect it.

Slime King

Posted 10/16/2007 7:49 AM (#279741 - in reply to #279672)
Subject: RE: slammer repair

Posts: 494

Location: midwest

I would use 5 minute epoxy to fix it. It will be stronger than superglue and also you can run a little bit on any open wood parts that may have become exposed when the lip came loose. This will seal everything and it should not come loose again.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread