|
|
Posts: 814
| Who or Where can I get a 17 pitch stainless prop with a HIGH RAKE and Cupping?
Wherever I look the lowest I see is a 19pitch I can run a 19pitch but the rpm's are too low and suggestions? thanks Mike
Edited by mskyhntr 6/27/2006 5:18 PM
|
|
| |
|
Posts: 1096
Location: Hayward, WI | What motor are you going to be putting it on? |
|
| |
|
Posts: 814
| 90 horse Yamaha 4 stroke |
|
| |
|
| i run the same motor and have a stainless 17" pitch on it now,got it from Iboats.com,check them out ,prices are great. |
|
| |
|
Posts: 1096
Location: Hayward, WI | Mecury Trophy Plus 4 blade has a 17" that would fit, just need to get the correct hub kit for it. Or I have had good luck with Turning Point Express Stainless, not high rake, but have good cup. Or some prop shops can re-pitch your "19 closer to 17". |
|
| |
|
Posts: 814
| I think the 17pitch four blade would be about the same as a 3 blade 19 pitch since you are turning another blade through the
water so I don't think that would help. but I will look into it thanks Mike |
|
| |
