MuskieFIRST | Abu Record Help » General Discussion

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> General Discussion -> Abu Record Help

Message Subject: Abu Record Help

muskie! nut

Posted 6/24/2006 10:18 PM (#197858)
Subject: Abu Record Help

Posts: 2894

Location: Yahara River Chain

I have a new Abu Record RN61HC (a true right handed reel

) . While at the Northwest Angle last week I was having problems with the reel engaging right away. Seems like it will do it when I have the rod pointed staight up. I have not had the reel apart yet (I hope for no small pieces) to clean and oil it. Do I need to do anything else to cure this? I don't want to send it back as I leave for the Indian Chain this Friday.

Any comments? This is a sweet reel and cast like a dream.

Chuck or reelman1?

muskynightmare

Posted 6/24/2006 10:38 PM (#197863 - in reply to #197858)
Subject: RE: Abu Record Help

Posts: 2112

Location: The Sportsman, home, or out on the water

contact Chuck Nelson. he knows the reels better than the designers.

ulbian

Posted 6/24/2006 10:42 PM (#197864 - in reply to #197858)
Subject: RE: Abu Record Help

Posts: 1168

Glad to hear someone else out there uses "true right handed reels!!" Ha! Don't know what to tell you on this one but it probably is something pretty simple like grease or oil buildup somewhere.

Reason I am responding is that Chuck is in Manitowoc right now for a Salmon outing so he might not respond right away. I don't think the guy has slept more than 2 hours in the past 3 days. Spent yesterday out on the big pond with him and A-ROZ. What a good time. Chuck did mention that there were very few issues with the records but those that he has heard of were mainly related to the Grease or over-oiling problems. I'll simply defer to him though, but wanted to mention he was doing this Salmon deal and might not respond immediately.

Take care,
-Bob

NM Tiger

Posted 6/25/2006 12:55 AM (#197879 - in reply to #197864)
Subject: RE: Abu Record Help

Posts: 22

Location: Albuquerque

I have the exact same reel and right out of the box it didn't seem as smooth as I was expecting. I took it apart (no small parts or surprises) and everything was way overloaded with grease. After I cleaned it up a bit and substitued some of the grease for a little oil, the reel worked perfectly.

C_Nelson

Posted 6/25/2006 3:59 PM (#197928 - in reply to #197858)
Subject: RE: Abu Record Help

Posts: 578

Location: Sheboygan Falls, WI

.

Edited by C_Nelson 6/7/2008 12:42 PM

muskie! nut

Posted 6/25/2006 9:32 PM (#197977 - in reply to #197858)
Subject: RE: Abu Record Help

Posts: 2894

Location: Yahara River Chain

Chuck Nelson, thanks for replying.

I took it apart tonight and it had some water drops in it (spend a day on LOTW fishig in the rain), but other than that looks fine. No small parts - thank goodness.

It seems to work better, but at times it will skip and just won't engage. It feels like the drag is backed off all the way and the crank just turns freely.

I'm not sure if I can get to Dorn's (if I am able I will likely go to D&S as I know Gene has one) before I get to Canada as I have limited mobility due to my blindness.

Looking at the reel it seems to me that Abu would use a "shinier" surface for the clutch arm to slide back & forth on. It seems to drag somewhat. I know on my older reels that they used stainless (or chrome?) for the clutch arm to ride on. Any thughts on this?

Thanks guys, I know I could count on you for some help.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread