MuskieFIRST | Building Rod Locker in Boat » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Building Rod Locker in Boat

Message Subject: Building Rod Locker in Boat

tile guy

Posted 4/14/2006 8:51 PM (#187533)
Subject: Building Rod Locker in Boat

Posts: 87

I need to build a rod locker in a fish and ski boat. I have about 7'9" down the center, on the floor between the seats. 20 inches wide between the seats. I was thinking of a half inch treated plywood box about 5 inches high to hold 5 combos. Has anyone had to do this before and do you have any tips or ideas. This setup needs to be removable also.
Thanks Terry

setme31

Posted 4/21/2006 8:45 AM (#188269 - in reply to #187533)
Subject: RE: Building Rod Locker in Boat

Posts: 516

Location: Kildeer, IL

I’ve never made one myself, but I have seen pictures of some that looked pretty cool. They used golf club tubes to keep the rod holder organizer. The tips of the rod slides into the tube, so they can’t get tangled. Then they built shelves of different widths that the rod handles rested on. If needed, you can bungee cord the rod handles down. Look on bassboatcentral.com for ideas. If you search the archives, you will probably find what I am talking about. They will have pictures and everything.

I wouldn’t waste my money on treated lumber, because you are going to have to treat it yourself anyway. Just get regular plywood, and cover it with a coat of fiberglass resin.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread