|
|
Posts: 389
Location: Presque Isle Wisconsin | The new for 2005 Musky Innovations Jammer ( Hard Body crankbait ) will leak around the hook hangers after about a half days use. This entirely ruins the action of an otherwise excellent lure.Had three-All three leaked. Spoke to Brad Ruh yesterday. He sdaid he is aware of the problem and is 99% sure it is fixed. He suggests using ZAP_A GAP ( Dont know what this is ) to seal around the hangers if you have already purchased the lure.To me the problem will be knowing what you are buying off the shelves. Is it a corrected model or an older one. Make sure you talk to your tackle dealer and that he will take it back if it leaks.The lure has been terrific for me this season and highly recommend it once the problem is resolved. |
|
| |
|
Posts: 32958
Location: Rhinelander, Wisconsin | Another product to seal around the hangers is Elmer's Probond, a polyurethane glue that adheres well and expands as it cures a bit. otherwise, a good epoxy will get it done, too.
Thanks for the heads up, Howie. |
|
| |
|
Posts: 1939
Location: Black Creek, WI | Yup... epoxy will work.
Its the fisherman's Duct Tape.
jlong |
|
| |
