Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> General Discussion -> Adding a second battery. Do I need a battery switch? |
Message Subject: Adding a second battery. Do I need a battery switch? | |||
SummerSchool |
| ||
Posts: 117 Location: Cheyenne, WY most of the year | I previously had two 12v batteries installed in parallel to provide cranking and all my electronics needs. It worked great, never left me stranded. Now with my new boat I want to do the same, but do I need a battery switch? It seems like if I'm hooking them up in parallel, they'll charge off the motor when in use as needed. What's wrong with my thinking? Thanks everyone | ||
jchiggins |
| ||
Posts: 1759 Location: new richmond, wi. & isle, mn | If you're wired in parallel 12v, you'll charge in parallel. Shouldn't matter. | ||
BillM |
| ||
Posts: 166 | No need for a switch, due to what jchiggins mentioned above. | ||
RLSea |
| ||
Posts: 480 Location: Northern Illinois | The main reason for a switch is to isolate your load. You are less likely to drain the batteries by leaving something on accidently if you have a switch to turn everything off at the source. I have 3 circuits each with its own switch: trolling motor, electronics, and accessories (lights, pumps, etc. from the starter battery). Never put a switch between the battery and motor. Edited by RLSea 5/30/2023 10:25 PM | ||
danlaboucane |
| ||
Posts: 482 | Never put a switch between the battery and motor. Why not ? | ||
miket55 |
| ||
Posts: 1208 Location: E. Tenn | danlaboucane - 5/31/2023 5:26 AM Never put a switch between the battery and motor. Why not ? It fails, (and they do, just often enough) and you have nothing. | ||
RLSea |
| ||
Posts: 480 Location: Northern Illinois | Yes ^^ and switches aren't engineered to handle the current surge motor starters demand. One of the first things a Mercury mechanic will check when you have a motor problem is battery connections and +cable condition. Proper voltage level is very important for modern motors to function well. If you put a switch in there besides, it's just another possible place for voltage drop. | ||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |