|
|
Posts: 243
| Looking to upgrade my winch, have a 681 VS and would like it to mount easily to the existing setup. Interested in suggestions on something with a lot of power to snug up the last few cranks. |
|
| |
|
Posts: 31
| Check out the Fulton FW32000101 F2 Two-Speed Trailer Winch with Strap - 3200 lb. Load Capacity. The winch has lots of power and bolted right up to my Ranger Trail winch post. |
|
| |
|
Posts: 157
Location: Carney, Mi (in da UP eh!) | I put a Fulton F-2 it has 2000lbs of pulling pressure.....$132 on walmart online ... made a huge difference from the stock ranger winch...bolts right on
|
|
| |
|
Posts: 1126
Location: Minnesota. | .
Edited by Jeremy 7/23/2021 11:11 PM
|
|
| |
|
Posts: 1126
Location: Minnesota. | dKrum - 6/9/2021 10:07 PM
Check out the Fulton FW32000101 F2 Two-Speed Trailer Winch with Strap - 3200 lb. Load Capacity. The winch has lots of power and bolted right up to my Ranger Trail winch post.
Thank you! |
|
| |
|
Posts: 482
| UPMuskyr - 7/15/2021 5:23 PM
I put a Fulton F-2 it has 2000lbs of pulling pressure.....$132 on walmart online ... made a huge difference from the stock ranger winch...bolts right on
just received the same winch and i find it feels cheap and lots of play everywhere , even the exagon part that goes to the handle is very loose in the handle socket .
am i asking for too much ? it does look good and winches are not a very precise part .
would be nice to compare to a 3200 !
|
|
| |
|
Posts: 1676
Location: Mt. Zion, IL | After wearing out the gears in too many Fulton winches, Dutton Lainson are the only ones I have found that last. Fulton replaced my 1600 twice before they said I must be doing something wrong. I have a roller trailer and actually winch the boat up the last 18” every time I load.
https://www.dutton-lainson.com/proddetail.php?prod=15440 Will do you just fine. Remember the winch pull rating is on the 1st wrap, not an empty drum |
|
| |
