|
|
Posts: 36
Location: Kansas City MO | So I've got one that takes on water and one where it turns in the front. Filled the water logged one with foam today. any idea on the front spinner?
Regards,
Mike |
|
| |
|
Posts: 787
Location: Delavan, WI | First shake lure there should not be a rattle in main chamber if there is -There is a triangular lead weight inside located upfront on bottom if you hit a rock with it little tabs that hold it in place can break and it comes loose. that can cause bait to run improper, there is a way to fix it by drilling a 5/16 hole on top between the eyes drip some crazy glue, set it back in place with a small screw driver, let it dry for a bit- then foam fill and your'e done |
|
| |
|
Posts: 3868
| Get a new Raider. If yer lucky it will make a squeak squeak sound on the retrieve. Just like a scared duckling or baby loon. |
|
| |
|
Posts: 360
| Bigger front hook or weight on front hook |
|
| |
|
Posts: 390
| I've had this issue with the last 2/3 topraider I've purchased. The weight is normally dislodged and it's difficult to remedy. Despite the fish I've caught on these I've moved on to products with better quality control. |
|
| |
