MuskieFIRST | Trolling Motor for Tuffy Esox Magnum » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Trolling Motor for Tuffy Esox Magnum

Message Subject: Trolling Motor for Tuffy Esox Magnum

Jeff_J

Posted 5/25/2003 12:01 PM (#71362)
Subject: Trolling Motor for Tuffy Esox Magnum

Posts: 36

I want to put a trolling motor on the back of my 1999 Esox Mag. Is the power supply/receptacle it set up for 12V or 24V?

Thanks for your help,

Jeff_J

MossFrog

Posted 5/26/2003 9:56 AM (#71409 - in reply to #71362)
Subject: RE: Trolling Motor for Tuffy Esox Magnum

Posts: 49

Jeff_J,
I just swapped out the trolling motor on the rear of my 2001 esox mag. You'll have to look at how the batteries are wired up front to see if you're wired for 12 or 24 volt. Mine was wired for 12volt, but I was able to wire it up for 24 volt and utilize the same rear plug.

I have a 24volt 74lb Minn Kota Vantage on the back now and it works great!

MossFrog

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread