Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 2 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Good hook cutters... what do you recommend |
Message Subject: Good hook cutters... what do you recommend | |||
Nell |
| ||
Posts: 122 | I have been fishing muskies for the past six or so years and never hooked one super bad ever.... LUCK... except one I hooked in the back that missed a suick.... now that WAS a fight.... however always wondered what would I do if one way hooked bad?!?!? I have the jaw spreaders in easy reach, pliers with hook cutters, etc.... BUT last weekend a northern got hooked pretty tight and we tried the hook cutters on the pliers and quickly realized and have been looking but cannot find a hook cutter that strikes my liking or looks like it would work well.... What do you guys recommend? | ||
Tigerhunter |
| ||
Posts: 283 | Most people use knipex. I have been using harbor freight mini bolt cutters (~$8) and have worked great so far but I only fish about half a dozen times a season. I've cut 4-6 7/0 hooks do far and they seem to be holding up just fine. Eventually I will upgrade to knipex and have these as backups. | ||
psv |
| ||
Posts: 469 Location: MN | Knipex - you'll not be sorry. | ||
muskyhunter47 |
| ||
Posts: 1638 Location: Minnesota | Knipex bought mine at amazon. Com | ||
VMS |
| ||
Posts: 3479 Location: Elk River, Minnesota | Hiya, No doubt knipex are the way to go. I used to purchase the harbor freight ones, but after a year or so of use, one of the cutting heads would break off.. I'm pretty quick to cut hooks on a fish. If I cannot get it to come out with a couple of yanks (not to the pint if damaging the fish any more than what the hook gas already done) I'll cut the hooks and free them by pulling the barbed end through. I'd much rather put on a new hook rather than risk more damage to the fish. I've had my knipex for about 6 years now... Lives in the boat, gets rusty, and has yet to fail me. Bought it used off eBay for about $25 or so. It is definitely worth it to pay a little more... You'll kick yourself when you have a fish hooked up well then go to cut the hook and the cutter breaks. Then you are SOL trying to quickly unhook the fish.. Steve | ||
zombietrolling |
| ||
Posts: 246 | Knipex. | ||
Landry |
| ||
Posts: 1023 | I just bought some knipex and the cut 8/0 hooks easily. They are surprisingly small(but long) too which will make it easier to pole inside a fish mouth. Well worth the dollars. I attached a float to them. | ||
DonPursch |
| ||
Posts: 540 Location: Leech Lake, Walker MN | Knipex for sure I cutlets of hooks never fail | ||
Nell |
| ||
Posts: 122 | Sounds like Knipex it is! Thanks guys! | ||
Nell |
| ||
Posts: 122 | Which knipex do you recommend... they have a few I am guessing people use... | ||
psv |
| ||
Posts: 469 Location: MN | Knipex 71 01 200 Bolt Cutters - I use this model
| ||
VMS |
| ||
Posts: 3479 Location: Elk River, Minnesota | If you can get the one with the spring that separates the sides in my humble opinion is preferred. Then you are not having to worry about opening the cutters as they are open from the get go... Easier for me to control and maneuver as needed Steve | ||
Pointerpride102 |
| ||
Posts: 16632 Location: The desert | VMS - 7/4/2014 10:16 PM If you can get the one with the spring that separates the sides in my humble opinion is preferred. Then you are not having to worry about opening the cutters as they are open from the get go... Easier for me to control and maneuver as needed Steve x2 | ||
EastwoodNorris |
| ||
Posts: 59 Location: Fifield | Tie a string on them sons of guns and wear on your wrist. They don't give them away! | ||
Yooper Padre |
| ||
Posts: 337 Location: Watersmeet, Michigan | Ditto! (I donated a set of jaw spreaders to the lake gods last week. I know better, but just wasn't thinking.) Fr. K | ||
btfish |
| ||
Posts: 410 Location: With my son on the water | I have used the knipex and still have one. After a few years of use even with adjustment it didn't close all the way. A buddy put me onto a Shimano Heavy duty hook cutter. It is a different design than the Knipex I have had that one now for XX year and it still is going strong and it cuts my 8/0 just fine. What ever you get, drill a hole in the handle and like has been mentioned put a wrist strap on it. Even a shoe string works. http://fishsoutheastern.com/shimano-heavy-duty-hook-and-cable-cutte... | ||
TheMuskyMan |
| ||
Posts: 338 Location: Maryland | Will these work? Attachments ---------------- 31-xbIf1tJL._SY200_.jpg (13KB - 177 downloads) | ||
Nell |
| ||
Posts: 122 | When I looked I was thinking the spring ones would be the recommended..... just checking.... they are expensive but amazon has them half off and free shipping til the 7th... I would just feel better having a good bolt cutter in the boat! Thanks guys! Now just hope I don't get a mangled mess of hooks in the mouth before I can get a pair..... been super lucky so far with Muskies.... now pikes they get a little crazy on the strikes and more often get a mouth full lol | ||
psv |
| ||
Posts: 469 Location: MN | btfish - 7/5/2014 6:51 AM I have used the knipex and still have one. After a few years of use even with adjustment it didn't close all the way. BTfish Knipex, I believe, has a life time warranty. Did you try to contact the company for exchange? | ||
Mojo1269 |
| ||
Posts: 752 | TheMuskyMan - 7/5/2014 7:15 AM Will these work? Yup. THat is the model I use... | ||
fish4musky1 |
| ||
Location: Northern Wisconsin | Was really glad to have Knipex a few weeks ago when my pinky was attached to a 30" northern with a 5/0 hook. | ||
MstrMusky |
| ||
Posts: 156 | fish4musky1 - 7/5/2014 9:48 AM Was really glad to have Knipex a few weeks ago when my pinky was attached to a 30" northern with a 5/0 hook. 30" Northerns are real jerks. The only bigger jerks are 22-26" Northerns, as they flop completely upside and look like they are TRYING to get the hooks in your hands. | ||
RyanJoz |
| ||
Posts: 1710 Location: Mt. Zion, IL | TheMuskyMan - 7/5/2014 7:15 AM Will these work? Same as what I use. | ||
Propster |
| ||
Posts: 1901 Location: MN | Nell - 7/5/2014 9:20 AM When I looked I was thinking the spring ones would be the recommended..... just checking.... they are expensive but amazon has them half off and free shipping til the 7th... For half price I was going to get another pair, but I'm not seeing it. On Amazon right now the best I see are $48. Care to send a link? | ||
SixBowls |
| ||
Posts: 149 | Propster - 7/5/2014 11:59 AM Nell - 7/5/2014 9:20 AM When I looked I was thinking the spring ones would be the recommended..... just checking.... they are expensive but amazon has them half off and free shipping til the 7th... For half price I was going to get another pair, but I'm not seeing it. On Amazon right now the best I see are $48. Care to send a link? Looking too. Donated a pair to the river recently. | ||
adubs |
| ||
Posts: 151 Location: Chippewa Falls, WI | $52 for the 20 degree angled ones with the spring. I just bought a pair of these on another site last week for $63 and thought that was a decent deal...I figured the angled ones would make it easier to get to hooks in tough spots...we'll see. http://www.amazon.com/71-22-200-SBA-Highleverage/dp/B005EXO8B0/ref=... | ||
rbiwer |
| ||
Posts: 113 Location: Twin Cities | Anyone ever use the Williamson 8" double leverage cutters? | ||
ulbian |
| ||
Posts: 1168 | I have basically the same thing as knipex but they came from the Snap-On guy. Lifetime warranty, cuts just as good, and were much cheaper. Even with the Snap-On pair you are paying partially for the name. Knipex is the industry standard but compared to other stuff out there that is just as good and in some cases better are they really worth $50-$60 a pop? Good marketing on their part. I used to run the strap around my wrist until a fish went bonkers in the net, I let the hook cutter go and the fish tangled up in the rope and nearly yanked my hand off. Now they are tied to a boat cleat so if one does go insane I can step away cleanly. | ||
VMS |
| ||
Posts: 3479 Location: Elk River, Minnesota | I'll gladly pay that much as it potentially can save me costly trips to the Er to get hooks removed and/or stitched up. Steve | ||
Eddy B |
| ||
Posts: 5 | I have used a few cheaper pairs and they just did not cut well. Even the USA made Kleins did not cut hooks well. I bought a pair of Knipex used on Ebay a few years ago for about $22.00 and they work great! Hooks don't have a chance. I keep them in my dry box and there are no signs of rust. But like others said a lanyard would be a good idea so they don't go swimming. I assume Knipex uses a really good heat treatment on the jaws for them to cut so well. | ||
Jump to page : 1 2 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |