Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 2 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Tackle Industries NEW telescopic rods coming soon! 9'6", 10' and 10'6" MH, XH and XXH |
Message Subject: Tackle Industries NEW telescopic rods coming soon! 9'6", 10' and 10'6" MH, XH and XXH | |||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | We have been working on all new 9'6", 10' and 10'6" telescopic rods (MH, XH and XXH). Testing is completed and we will have them out this year. It will be late June/July when we release the new telescopic rods. These are some bad rods for sure. Super light with all new blank designs. Had to source some new stronger (and lighter) materiel for the new blanks being this long. The new materiel is so good we will be moving all of our current rods over to this material by 2016. One extra tidbit in info ![]() Tackle Industries will be the first ONLY rod company to ever offer blanks like these to builders and to the general public. So, if you have a favorite rod builder have them contact us ASAP. We are taking orders for the blanks right now. We will have limited numbers of TI finished rods and blanks due to the unique nature of these rods. I did not want to invest a lot of $$$ until I find out that these new rods will actually sell well. Can't wait!!! James | ||
curleytail![]() |
| ||
Posts: 2687 Location: Hayward, WI | That sounds awesome! Are you selling blanks to the general public yet? Would you say the actions of the new rods are the same as they were or have they changed at all? I like the sounds of a 9'6" telescopic a lot. | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | Blanks will be out late June/July along with the first set of the new rods!! Can't wait for these to be our of production. Been working on them for almost a year now. The actions are really close to the 9' MH, XH and XXH actions. That was the harder part to zero in on. I could have came out with them about a month ago but I wanted a few more rounds of testing and it was well worth it. | ||
CASTING55![]() |
| ||
Posts: 968 Location: N.FIB | Price? | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | CASTING55 - 3/28/2015 6:58 PM Price? Getting this question a lot... The rods are costing us about $17-$20 average more to make so instead of "profiting" on that I was just planning on taking up my MSRP by $20 so $165+$20 would be a final retail of $185 for these new long tele rods. As usual, our goal is to make quality fishing tackle and keep it affordable for everyone. So far I think we are doing a good job ![]() I plan on pre-asking all of my retailers and rod builders WHO will be carrying these rods in a few months. I will post this info as soon as I get it so you can all visit your favorite retailer/custom rod builder. I think we will pick up a few more retailers with this rod too. If not, they are going to miss out on some super sale opportunities! WE are always doing our best to get the product in stores near you but don't worry if you our out of some sales territory, there are a few really good online retailers that can take care of you and many have FREE shipping!! James | ||
btfish![]() |
| ||
Posts: 410 Location: With my son on the water | What will the short length be? As in the length when a guy stores them? Thanks | ||
Zinox![]() |
| ||
Posts: 1100 | You should have made one in XXXH 10'6" freaking pounder canon :D | ||
Putts![]() |
| ||
Posts: 28 | I'd be really interested in the 10'6 blank. Do you think it would be possible and turn out well to have a rod builder build me a 2 piece rod with the blank? I have the ti 9ft mh 2piece and love it, I would like a rod similar to it only longer. | ||
4amuskie![]() |
| ||
Ill take a 10 xxh!!!!! | |||
rodbender![]() |
| ||
Location: varies | to keep in shape, can we pole vault with them in the off season? lol. any non- telescopic possibilities in the longer lengths? | ||
esoxone![]() |
| ||
Posts: 425 | James,Great Great Great News !!!! esoxone | ||
Lucky Craft Man![]() |
| ||
Posts: 242 | This is unbelievable! I had to buy a stock 9' rod and have the cork and reel seat stripped down to have a custom 10'3" Pounder rod made (i did they same to have a 10'3" Bucktail rod made). It's nice to see that I won't have to have all that done for the next one. As a side note, for those guys who haven't fished with a 10'+ rod, you don't know what you are missing. Figure-8's are a total breeze with real wide turns and you can go 4' deep without much effort. | ||
JakeStCroixSkis![]() |
| ||
Posts: 1425 Location: St. Lawrence River | Holy cow lol why not just cut to the chase and build a 12 footer? Someone will be building them by 2018. Lol jk | ||
achotrod![]() |
| ||
Posts: 1283 | How long will they be collapsed? | ||
milje![]() |
| ||
Posts: 410 Location: Wakefield, MI | Hmmmm... Maybe I won't be needing planer boards on the row troller after all. What is the collapsed length? | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | btfish - 3/29/2015 9:03 AM What will the short length be? As in the length when a guy stores them? Thanks Rods will reduce by 18 inches. Hence the longest one being 10'6" as we can only ship up to 9' tubes... I would have went for a 11' but that would need to be a 2pc rod. | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | rodbender - 3/29/2015 10:26 AM to keep in shape, can we pole vault with them in the off season? lol. any non- telescopic possibilities in the longer lengths? Not right now. Cost is about $80 to ship with FedEx for anything over 9'... | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | Putts - 3/29/2015 9:44 AM I'd be really interested in the 10'6 blank. Do you think it would be possible and turn out well to have a rod builder build me a 2 piece rod with the blank? I have the ti 9ft mh 2piece and love it, I would like a rod similar to it only longer. Jeremy with Tuscarora will be building a few prototypes on the blanks soon. You should call or email him with your build Qs. He can do about anything! | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | JakeStCroixSkis - 3/29/2015 1:29 PM Holy cow lol why not just cut to the chase and build a 12 footer? Someone will be building them by 2018. Lol jk ![]() | ||
musky513![]() |
| ||
Posts: 529 | I am interested in getting one of the 10'6" blanks when they're available! | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | musky513 - 3/29/2015 6:46 PM I am interested in getting one of the 10'6" blanks when they're available! Just shoot me an email with our request and I will put you in my calendar and send you an email when they are ready to go!! thanks, James [email protected] | ||
Dave8121![]() |
| ||
Posts: 122 | Do you know when you'll have split grips available on these rods? | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | Dave8121 - 3/29/2015 7:06 PM Do you know when you'll have split grips available on these rods? If these sell well I will add the split grips for early 2016. My main issue is space to store inventory now. I have two buildings, a 50x70 and a 60x180 and they are almost full. With my new VEXAN bass and walleye rods in full production now they will be full soon. Growing pains ![]() James | ||
esoxbuckeye![]() |
| ||
Posts: 36 | What is the price on the new blanks? | ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | esoxbuckeye - 3/29/2015 9:46 PM What is the price on the new blanks? Still working on the blank price but it will be around $80-$90 I think. Trying to keep it on the low end so guys can build some killer rods on these blanks with their custom rod builders. Already had 5 custom rod builders contact me on these. Contact your rod builder and have them contact me ASAP if they want one. If I run out of blanks it will be December 2015 before I have more ready to go. I will have 50 per power per size available. | ||
gordonmann69![]() |
| ||
Posts: 149 | Great. More TI rods to buy!! | ||
dtaijo174![]() |
| ||
Posts: 1169 Location: New Hope MN | Will you have any prototypes at the MN Expo? At least for us to touch and see? and maybe forget one in my truck...? | ||
Zib![]() |
| ||
Posts: 1405 Location: Detroit River | Put me down for a 10'6" XXH blank.
| ||
Tackle Industries![]() |
| ||
Posts: 4053 Location: Land of the Musky | I doubt if I will have any to show at the MN show. Wish I did... | ||
ffdonnie![]() |
| ||
Posts: 179 Location: Wisconsin | Ill need some. And a new boat to get them in.... | ||
Jump to page : 1 2 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |


Copyright © 2025 OutdoorsFIRST Media |