Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Lures,Tackle, and Equipment -> Gore-Tex repair
 
Message Subject: Gore-Tex repair
Reef Hawg
Posted 10/1/2014 9:13 AM (#732763)
Subject: Gore-Tex repair




Posts: 3518


Location: north central wisconsin
I decided to resurrect my 10 year old summer Gore-Tex guidewear in the Nikwax product. Now that it is seemingly revitalized I have noticed a tear in the knee of my bibs. It is a 2" long tear through the outer and inner goretex layers.

Can someone suggest a decent repair? I thought about taping it, but in lieu of tearing the outer fabric moreso, it might be difficult to get at the inner goretex to tape.
miket55
Posted 10/1/2014 10:02 AM (#732776 - in reply to #732763)
Subject: Re: Gore-Tex repair




Posts: 1267


Location: E. Tenn
Would this help? http://www.youtube.com/watch?v=T0fpQZRpISI

..and could you turn the bibs inside out to patch them?
Mojo1269
Posted 10/1/2014 10:09 AM (#732778 - in reply to #732776)
Subject: Re: Gore-Tex repair





Posts: 752


Thrifty Outfitters (associated with Midwest Moutaineering) in Minneapolis is a certified Gortex Repair shop. I have used them and would reccomend them.
Reef Hawg
Posted 10/1/2014 1:51 PM (#732814 - in reply to #732763)
Subject: RE: Gore-Tex repair




Posts: 3518


Location: north central wisconsin
Wow, guess I should've youtubed it. However, watching the video, I don't see how the patch necessarily adheres to the inner layer. And as you suggest, might be best to tape from the inside, where the goretex membrane isn't anymore exposed, but can be made so less noticeably than from the outside.

I'll also look into the goretex repair shop you mention, but living in central WI, and knowing the gear is 10 years old, I think a quick and easy fix that doesn't cost a ton might be my answer. I'll check Gander Mountain for the repair kit(already have $20 in with the nikwax).
BDizzle
Posted 10/2/2014 7:39 AM (#732916 - in reply to #732763)
Subject: Re: Gore-Tex repair




Posts: 8


Aqua Seal. Put some fabric behind the tear and spread the aqua seal at least a quarter inch past the tear in all directions. The stuff is made to fix holes in waders. It will look like you got clear caulk smeared on your knee, but the stuff works. I have fixed waders, dry bags and rubber hunting boots with the stuff. Good luck.
ShutUpNFish
Posted 10/2/2014 7:48 AM (#732917 - in reply to #732763)
Subject: Re: Gore-Tex repair





Posts: 1202


Location: Money, PA
I would just get a wader repair kit...yeah Aqua Seal is great!
Reef Hawg
Posted 10/2/2014 9:14 AM (#732929 - in reply to #732763)
Subject: RE: Gore-Tex repair




Posts: 3518


Location: north central wisconsin
Thank you, I might even have some wader/hip boot repair around somewhere. Perhaps a dab of sportsmans goop for that matter..

I think I'll try the tape recommended for the the trip this week, and try to do a better repair when I get home.
esoxone
Posted 10/2/2014 2:18 PM (#732996 - in reply to #732763)
Subject: Re: Gore-Tex repair




Posts: 424


Jason,

this video shows how to repair gore-tex guidewear

https://www.youtube.com/watch?v=U9VP4FBv3ag


esoxone
miket55
Posted 10/2/2014 4:06 PM (#733011 - in reply to #732763)
Subject: Re: Gore-Tex repair




Posts: 1267


Location: E. Tenn
Aqua Seal is the name of the stuff I was looking for when I stumbled on the video..
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)