Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Lures,Tackle, and Equipment -> Hook and Blade Replacement on double 10'S
 
Message Subject: Hook and Blade Replacement on double 10'S
kgmonty
Posted 5/23/2010 1:40 AM (#442191)
Subject: Hook and Blade Replacement on double 10'S




Posts: 14


Hello, I'm pretty new to Musky fishing, and living in Texas does'nt help with gaining experience. I have a few baits that need tuned up. Do you just use a split ring to replace hooks that are connected directly to the shaft? Will this effect the action? If not, how do you go about doing this? Also, how do you replace the blades? One of the baits in question is a bucher bigfoot. Thanks in advance.
jlb66
Posted 5/23/2010 8:02 AM (#442202 - in reply to #442191)
Subject: RE: Hook and Blade Replacement on double 10'S




Posts: 41


Location: Wheaton, MN
Split ring and shrink wrap, It shouldn't hurt it at all, most likley it will make it even better.

Edited by jlb66 5/23/2010 8:05 AM
kgmonty
Posted 5/23/2010 8:33 PM (#442283 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S




Posts: 14


Thanks for your reply. Do you use the same for the blades?
kgmonty
Posted 5/23/2010 8:37 PM (#442285 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S




Posts: 14


Thanks for your reply. Do you use the same for the blades?
jlb66
Posted 5/23/2010 9:18 PM (#442293 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S




Posts: 41


Location: Wheaton, MN
Never replaced blades before. I've tried but did not succeed. I now throw a bucktail that you can change blades out via split ring giving you unlimted combinations. But never changed blades on a fixed shaft bucktail.

Edited by jlb66 5/23/2010 9:19 PM
bassinbob84
Posted 5/23/2010 10:54 PM (#442302 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S




Posts: 646


Location: In a shack in the woods
You have to reshaft it. Cut the shaft and transfer everything onto a new one. You can pm and I will explain it in more detail.
Yake Bait
Posted 5/24/2010 8:28 PM (#442457 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S





Posts: 388


The front hook is split ringed. The back hook can be cut off at the hook eye itself as opposed to the shaft wire if you want to avoid replacing the shaft. Cut off at the hook eye and replace with new on a split ring. Slide some shrink tube over the hook shank before you ring it on, then shrink the tube to keep it straight off the back of the lure.

I am not a big fan of the middle hook because the flashabou tends to tangle up into the hook. I use only a back hook.
kgmonty
Posted 5/25/2010 11:33 AM (#442546 - in reply to #442191)
Subject: Re: Hook and Blade Replacement on double 10'S




Posts: 14


Thanks for the replys. I will give each a shot.
Fish and Whistle
Posted 5/26/2010 12:54 PM (#442788 - in reply to #442457)
Subject: Re: Hook and Blade Replacement on double 10'S





Posts: 462


Location: Antioch, IL
Yake Bait - 5/24/2010 8:28 PM
I am not a big fan of the middle hook because the flashabou tends to tangle up into the hook. I use only a back hook.


Shrink wrap the shank of the hook (push it down over the area where the treble meet). This will help keep the flashabou from getting hung up. Works like a charm
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)