MuskieFIRST | ABU 7000 question » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> ABU 7000 question

Message Subject: ABU 7000 question

Roughneck1860

Posted 11/23/2009 8:24 PM (#409620)
Subject: ABU 7000 question

Posts: 295

Location: Southern Ontario, Detroit River and Lake StClair

Do any of the ABU 7000's engage when you crank the handle or do you have to manually engage them. I'd like to get one for a "Pounder" reel but don't like the idea of having to manually engage it before the retrieve. None of my local dealers stock them so I can't handle one before ordering it.

Thanks
Tim

missourimuskyhunter

Posted 11/23/2009 8:45 PM (#409622 - in reply to #409620)
Subject: RE: ABU 7000 question

Posts: 1316

Location: Lebanon,Mo

I thought they all engaged themselves..

kdawg

Posted 11/24/2009 7:59 AM (#409660 - in reply to #409620)
Subject: RE: ABU 7000 question

Posts: 756

Both. You can either just crank the reel to engage or do it manually. Kdawg

tuffy1

Posted 11/24/2009 8:32 AM (#409666 - in reply to #409660)
Subject: RE: ABU 7000 question

Posts: 3240

Location: Racine, Wi

Once you start reeling (at least with the maroon 7000s), they will engage automatically. I use the 7000's for my pounder reels as well, and they have worked as I wanted for this application.

Muskerboy

Posted 11/24/2009 2:43 PM (#409689 - in reply to #409620)
Subject: Re: ABU 7000 question

Posts: 727

The 7000 engages by itself, just be careful when you cast because sometimes it shuts on you.

Roughneck1860

Posted 11/24/2009 4:16 PM (#409693 - in reply to #409620)
Subject: Re: ABU 7000 question

Posts: 295

Location: Southern Ontario, Detroit River and Lake StClair

Thanks for the replies guys. I've only used one once before and it was older and you had to engage it manually. If they all do it now I' good to go.

Good Fishin'
Tim

Windburn

Posted 11/24/2009 6:53 PM (#409709 - in reply to #409620)
Subject: Re: ABU 7000 question

Posts: 115

Location: Birch Run

If you get a new 7000 red, make sure the lever is all the way back, with that large power handle it can cause the lever to engage during the cast. The reel works just fine, the handle has to be in the right spot for the reel to stay in freespool.

Roughneck1860

Posted 11/25/2009 4:42 AM (#409738 - in reply to #409709)
Subject: Re: ABU 7000 question

Posts: 295

Location: Southern Ontario, Detroit River and Lake StClair

Windburn - 11/24/2009 7:53 PM

If you get a new 7000 red, make sure the lever is all the way back, with that large power handle it can cause the lever to engage during the cast. The reel works just fine, the handle has to be in the right spot for the reel to stay in freespool.

I found that with the counter balanced handles on my 6500's as well. I have a couple of large double paddle handles on order right now that measure the same as my current ones and that should fix it up. It's not a good feeling winding up with a Pounder and only to hear that "click" half way through the swing......

Tim

J Nail

Posted 11/25/2009 2:23 PM (#409784 - in reply to #409738)
Subject: Re: ABU 7000 question

Posts: 162

Location: Bemidji, MN

agreed, the new "counterbalanced" power handles are a joke. They don't have enough weight to actually counterbalance the handle side, and close while casting constantly. The ones I am talking about are for the 6500's with the new cushy gray and chrome handle. the old squared off ones are way better.
I got a pair of 7000 i C3's, the silver ones that have been used mostly for sturgeon this year, and seem really good, the kids are able to cast out a sturgeon rig with them with no problems, and they have been bullet proof. No blown up gears this year!

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread