MuskieFIRST | Source for .062 Wire for Thru Wire » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: "GOLDEN GET OFF THE PHONE!!!!" Running_Hot (just before throwing a danish at me on the boat)
- (Added by: Slamr)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Source for .062 Wire for Thru Wire

Message Subject: Source for .062 Wire for Thru Wire

ShaneW

Posted 12/29/2007 2:26 PM (#290921)
Subject: Source for .062 Wire for Thru Wire

Posts: 619

Location: Verona, WI

I was thinking about working on some baits for the first time in a year and want to try some thru wire - anyone know a good source for .062 wire?

Shane

musky2much

Posted 12/29/2007 3:03 PM (#290925 - in reply to #290921)
Subject: RE: Source for .062 Wire for Thru Wire

Posts: 18

Location: Westerville, Ohio

If you have a local welding supply shop, they are usually a great source for .045 or .062 stainless steel wire. Most sell it by the pound in 36" pre-straightened lengths.
Cliff

www.alleycatlures.com

ron f

Posted 12/29/2007 5:01 PM (#290935 - in reply to #290921)
Subject: Re: Source for .062 Wire for Thru Wire

moore

ToddM

Posted 12/29/2007 7:39 PM (#290962 - in reply to #290921)
Subject: RE: Source for .062 Wire for Thru Wire

Posts: 20269

Location: oswego, il

Working with .062 is about as much fun as slapping your grandma. It's what you have to have if you want a big bait though. Moores does have the .062. I like their fast turn around on orders.

rjbass

Posted 12/30/2007 8:03 AM (#291003 - in reply to #290962)
Subject: RE: Source for .062 Wire for Thru Wire

Posts: 179

Location: Sault Ste. Marie, Michigan

Here is where I get all my wire....

http://www.skygeek.com/ms20995c62.html

Rod

ShaneW

Posted 12/30/2007 8:19 AM (#291004 - in reply to #291003)
Subject: Re: Source for .062 Wire for Thru Wire

Posts: 619

Location: Verona, WI

Thanks guys - I looked all over but couldn't find it. Guess I should have checked out Moore's as well.

Shane

castmaster

Posted 12/30/2007 10:30 AM (#291010 - in reply to #290921)
Subject: Re: Source for .062 Wire for Thru Wire

Posts: 910

Location: Hastings, mn, 55033

Stamina also sells pre straightened .062 stainless wire in 18" lengths.

Brad

Posted 12/30/2007 11:11 AM (#291014 - in reply to #290921)
Subject: Re: Source for .062 Wire for Thru Wire

Posts: 169

www.luremaking.com sells a 12" that is looped on one end.

Brad

Kingfisher

Posted 1/2/2008 5:25 PM (#291583 - in reply to #290921)
Subject: RE: Source for .062 Wire for Thru Wire

Posts: 1106

Location: Muskegon Michigan

If you think .062 is bad try .078 spring temper. That is what we use on the Deepthreats. I even form the belly hook holders out the stuff. I buy 25 to 50 lbs at a time from Interwire corporation. they have 75 dollar minimum. I also use .057 for our new small shad baits. Kingfisher

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread