MuskieFIRST | Glue for bump board » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Glue for bump board

Message Subject: Glue for bump board

JLR

Posted 4/30/2015 10:16 PM (#767455)
Subject: Glue for bump board

Posts: 335

Location: Pulaski, WI

My T's Tackle flew out of the boat and cracked. What's the best type of glue to fix it?

wallydiven

Posted 5/1/2015 9:20 AM (#767486 - in reply to #767455)
Subject: Re: Glue for bump board

Posts: 538

Location: northern indiana

How bad is it? Clear gorilla tape might do the trick.

JLR

Posted 5/1/2015 11:10 AM (#767497 - in reply to #767455)
Subject: Re: Glue for bump board

Posts: 335

Location: Pulaski, WI

It's in two pieces. If I knew what kind of plastic it's made of I'm sure the correct glue would work. Otherwise I'll try epoxy or superglue.

horsehunter

Posted 5/1/2015 11:32 AM (#767502 - in reply to #767455)
Subject: Re: Glue for bump board

Location: Eastern Ontario

I would try construction adhesive Gorilla or there is something with NO NAILS in the name just be sure it says waterproof ( not resistant )

Will Schultz

Posted 5/1/2015 11:54 AM (#767503 - in reply to #767455)
Subject: Re: Glue for bump board

Location: Grand Rapids, MI

I don't have one of their boards but every bump board I've see is made with PVC board and any solvent PVC weld should do the trick.

or call T's tackle: 262-334-4949

horsehunter

Posted 5/1/2015 12:07 PM (#767504 - in reply to #767455)
Subject: Re: Glue for bump board

Location: Eastern Ontario

Scratch my idea Will's seems much better

Trophyseeker50

Posted 5/1/2015 12:38 PM (#767506 - in reply to #767455)
Subject: Re: Glue for bump board

Posts: 791

Location: WI

If you can add some pins. Drill matching holes into the joined edge to give some add strength once glued. Or Kreg jig it from the back

Jeremy

Posted 5/2/2015 5:37 PM (#767595 - in reply to #767455)
Subject: Re: Glue for bump board

Posts: 1150

Location: Minnesota.

Don't forget about Gorilla Glue. That crap will hold the Gates of Heaven open...!!!

JLR

Posted 5/2/2015 5:56 PM (#767599 - in reply to #767455)
Subject: Re: Glue for bump board

Posts: 335

Location: Pulaski, WI

Thanks guys. I took Will's advice and called T's Tackle. It is indeed expanded PVC. I glued it together will PVC glue. Seems good as new. They sent me a replacement hinge free of charge that I will use if it comes apart. Good customer service.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread