Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Lures,Tackle, and Equipment -> Muskie Innovations rod repair
 
Message Subject: Muskie Innovations rod repair
retiredmn
Posted 8/22/2012 11:20 PM (#580304)
Subject: Muskie Innovations rod repair





Posts: 34


Have a Muskie Innovations Bulldog "evolution" series spring/bucktail rod that the rear cork (the last 5") are quite soft (sort of a mushy feeling) in which the cork is so soft it is peeling & breaking up. It seems the last 5" of cork was added on. Any ideas or recommendations on who can fix the problem in Plymouth, Minnesota. I may even go for a new handle entirely. It seems that these rods have some inferior cork handles.

Got the rod from Thorne bros back in April at a tent sale. Contacted them and the 30 day warranty is over, however they gave me the email for Muskie Innovations so I could contact them since the rods are under factory warranty. I've emailed them 2x in the last 2 weeks and no reply yet.

In fact the other rod I bought at the same time Bulldog Evolution Magnum rod handle is soft (you can squeeze the handle). Both seem like prior to putting the handles on they were reamed out too much. Trying to get them repaired or getting new handles put on. Ideas are appreciated
eboost
Posted 8/23/2012 7:52 AM (#580334 - in reply to #580304)
Subject: RE: Muskie Innovations rod repair




Posts: 81


Location: Bloomingdale, IL		I'm not sure who would be in your area, but you can buy any supply you need to do it yourself from mudhole.com
Flambeauski
Posted 8/23/2012 8:36 AM (#580344 - in reply to #580304)
Subject: Re: Muskie Innovations rod repair




Posts: 4343


Location: Smith Creek		Buy some cork rings and do it yourself. Pretty darn easy. I use 2 part epoxy from a hardware store but if you buy the rings from Mudhole I'm sure they can recommend an epoxy specifically for cork.
Jeff Hanson
Posted 8/23/2012 8:54 AM (#580353 - in reply to #580344)
Subject: Re: Muskie Innovations rod repair




Posts: 944


call 317-752-8608 ask for rick or kris- they will get you taken care of.
They do all the warranty stuff for innovations rods.
Jeff Hanson
madisonmuskyguide.com
VonBraun
Posted 8/23/2012 11:14 AM (#580381 - in reply to #580353)
Subject: Re: Muskie Innovations rod repair




Posts: 173


Jeff Hanson - 8/23/2012 8:54 AM

call 317-752-8608 ask for rick or kris- they will get you taken care of.
They do all the warranty stuff for innovations rods.
Jeff Hanson
madisonmuskyguide.com
He's right, I found out sunday the reel seat was spinning on my bulldawg rod and I already have a replacement in hand because I'm heading to lake of the woods on friday...still have to return the old one and money refunded but he was great in getting the job done. I would suggest calling and leaving a message but calling back occasionally until you speak to Rick.
esox1980
Posted 8/23/2012 2:23 PM (#580425 - in reply to #580304)
Subject: RE: Muskie Innovations rod repair





Posts: 265


Location: Manitowish Waters WI		James from Tackle Industries helped me Extend a rod handle for a 9xxh I bought from him. It was a simple process. I would email James or send him a PM for some suggestions.
Guest
Posted 8/23/2012 3:36 PM (#580436 - in reply to #580304)
Subject: RE: Muskie Innovations rod repair


Thornes can replace the cork...pretty inexpensive...or they sell cork
Tackle Industries
Posted 8/23/2012 4:36 PM (#580449 - in reply to #580304)
Subject: Re: Muskie Innovations rod repair





Posts: 4053


Location: Land of the Musky		www.mudhole.com has everything you need including video instructions.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)