Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> 4 Stroke Trolling with Main Motor
 
Reply New post
Message Subject: 4 Stroke Trolling with Main Motor
tmag
Posted 11/13/2008 5:17 PM (#345207)
Subject: 4 Stroke Trolling with Main Motor




Posts: 516


With a 40hp-50hp 4 Stroke Merc, would one need a trolling plate or will a 4 stroke 50hp idle slow enough to troll at slower speeds?

Thanks
jdsplasher
Posted 11/13/2008 5:35 PM (#345208 - in reply to #345207)
Subject: RE: 4 Stroke Trolling with Main Motor





Posts: 2325


Location: SE, WI.
You should not have to do any modifications to your trolling other than kick up the speed. I trolled with 90 hspower engines, 4 strokes for years. Now a 115 Etech.
Most trollers troll Toooooo slow!!!! Unless you are after walleyes.
tmag
Posted 11/13/2008 5:43 PM (#345210 - in reply to #345208)
Subject: RE: 4 Stroke Trolling with Main Motor




Posts: 516


OK.

How slow can you get it down?

Thanks
pikeman1
Posted 11/13/2008 6:07 PM (#345214 - in reply to #345210)
Subject: RE: 4 Stroke Trolling with Main Motor




Posts: 16


I have a 50hp 4 stroke merc on my 16ft tracker targa and it will do 2.5 on calm water at a idle, with my trolling plate down it will do 1.1 mph.
tmag
Posted 11/13/2008 6:31 PM (#345216 - in reply to #345214)
Subject: RE: 4 Stroke Trolling with Main Motor




Posts: 516


Thanks. That's exactly the info that I wanted.
suicknut
Posted 11/14/2008 5:29 PM (#345333 - in reply to #345216)
Subject: RE: 4 Stroke Trolling with Main Motor




Posts: 97


Location: Chaska MN.
Most guys I know that troll for skies run around 4 mph give or take 1/2 mph so your 4 stoke should be good for that and if its walleyes you could backtroll.
or tie a drift sock off the front and backtroll even slower.
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)