MuskieFIRST | Fixing a BullDawg » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Fixing a BullDawg

Message Subject: Fixing a BullDawg

agrimm

Posted 5/30/2006 2:38 PM (#194228)
Subject: Fixing a BullDawg

Posts: 427

Location: Wausau

What can be done when the lead wire/eye-let gets pulled out from a bulldawg?
I tried "melding" it back in place, but I assume the next fish/snag will result in the same issue.

Posted 5/30/2006 3:43 PM (#194238 - in reply to #194228)
Subject: RE: Fixing a BullDawg

Try the Hawgseekers glue system. Works awesome on rubber baits. hawgseekers.com This should work. Hope this helps.

kevin cochran

Posted 5/30/2006 7:59 PM (#194257 - in reply to #194228)
Subject: RE: Fixing a BullDawg

Posts: 374

Location: Bemidji

Good call on the Hawseekers glue. I also use a soldering iron for Bulldawgs.

muskynightmare

Posted 5/30/2006 10:58 PM (#194287 - in reply to #194228)
Subject: RE: Fixing a BullDawg

Posts: 2112

Location: The Sportsman, home, or out on the water

if you have a solid wire harness, about all you can do is zip-tie it back in place at the first hook hanger. Sounds dumb, but i've had one dawg that caught 7 fish after the repair, only to retire it later. I still run some that have been repaired in this fasion. Ask
K-bob, he has seen my "criple dawgs"

big gun

Posted 5/31/2006 7:40 AM (#194307 - in reply to #194228)
Subject: RE: Fixing a BullDawg

Posts: 462

Location: Madison Wi. Chain

Buy a new one and use the weight system for a tube. BG

Bytor

Posted 6/2/2006 7:45 AM (#194634 - in reply to #194228)
Subject: RE: Fixing a BullDawg

Location: The Yahara Chain

agrimm - 5/30/2006 2:38 PM

What can be done when the lead wire/eye-let gets pulled out from a bulldawg?
I tried "melding" it back in place, but I assume the next fish/snag will result in the same issue.

Was that an Uptown Dawg or a regular Dawg?

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread