MuskieFIRST | NACL handle on a Winch » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> NACL handle on a Winch

Message Subject: NACL handle on a Winch

dami0101

Posted 1/24/2015 3:51 PM (#750176)
Subject: NACL handle on a Winch

Posts: 750

Location: Minneapolis, MN

If I wanted to put an ABU NACL paddle handle on a Toro Winch would I need to make any other modifications to the reel?

Trophyseeker50

Posted 1/24/2015 4:15 PM (#750180 - in reply to #750176)
Subject: Re: NACL handle on a Winch

Posts: 791

Location: WI

I put one on my winch so that all three of my reels had the same feel. Just have to tighten the drag down bit it fits fine.

Ray Fuller

Posted 1/24/2015 10:13 PM (#750214 - in reply to #750176)
Subject: Re: NACL handle on a Winch

Posts: 340

Location: Lake County Illinois

I bent the tips slightly inward on my star drag,it made it easier to adjust the drag,and it made the star drag rub less on the handle, but that's optional.

RyanJoz

Posted 1/25/2015 8:30 AM (#750226 - in reply to #750176)
Subject: Re: NACL handle on a Winch

Posts: 1716

Location: Mt. Zion, IL

Why not just change the paddles to the foam?

dami0101

Posted 1/25/2015 11:18 AM (#750248 - in reply to #750226)
Subject: Re: NACL handle on a Winch

Posts: 750

Location: Minneapolis, MN

RyanJoz - 1/25/2015 8:30 AM

Why not just change the paddles to the foam?

Didn't know that was an option. I've never done maintinence on a reel before, assumed I had to replace the whole thing. Are the handles the same length between the NACL and the winch?

Propster

Posted 1/25/2015 12:12 PM (#750256 - in reply to #750226)
Subject: Re: NACL handle on a Winch

Posts: 1901

Location: MN

RyanJoz - 1/25/2015 8:30 AM

Why not just change the paddles to the foam?

Are you saying these are available somewhere? I am more interested in just getting the single large foam knob from the NACL, but it is not available to my knowledge (must buy entire handle). What can you tell us? It seems very similar handles are offered by Daiwa but don't know if just parts can be had from them either.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread