MuskieFIRST | Screw eye size? » Basement Baits and Custom Lure Painting

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Random quote: "Walleyes were designed to die in my live well!" circa 1978 Mr. Steve Worrall
- (Added by: Clark A)

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Screw eye size?

Message Subject: Screw eye size?

wvhillbillyjlm

Posted 9/1/2009 8:40 PM (#397511)
Subject: Screw eye size?

Posts: 278

Location: WV

What size do you use if you don't do the wire through, .072 or larger? Length?

BruceKY

Posted 9/1/2009 10:07 PM (#397531 - in reply to #397511)
Subject: RE: Screw eye size?

Posts: 392

Location: KY

I use both 0.07 or 0.09 depending on the application and wood. They are both plenty strong if balanced with the right hooks and tackle. I try to use the longest screw I can for the line tie as it takes the lion’s share of the abuse. On the belly hooks you can get away with a shorter screw because of the angle of pull. I always turn the eye so that the “hooked” end faces forward, and use epoxy when installing. Think about how many times jointed baits cycle back and forth when trolled for an hour. The line tie and joints are going to loosen up if they are not sealed tight from water, and rot, with epoxy. I have never experienced a failure. People talk about components being strong enough for any fish. I always build my lures to stand up to abuse like snags when trolling, fish rolling in the net, and years of exposure to water.

wvhillbillyjlm

Posted 9/2/2009 4:59 AM (#397553 - in reply to #397511)
Subject: Re: Screw eye size?

Posts: 278

Location: WV

What size drill bit do you use to predrill the holes for .072 eyelets?

Thanks

BruceKY

Posted 9/2/2009 7:31 AM (#397562 - in reply to #397553)
Subject: Re: Screw eye size?

Posts: 392

Location: KY

1/16 or a finish nail with the head cut off.

Tackle Industries

Posted 9/2/2009 10:13 PM (#397720 - in reply to #397562)
Subject: Re: Screw eye size?

Posts: 4053

Location: Land of the Musky

I like the 092 screw eyes and predrill with a 1/16.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread