|
|
Posts: 32888
Location: Rhinelander, Wisconsin | Yes, 1650 would be a great boat for you. It's actually bigger than my 1625 Fury, and I've had that to Vermilion a few times and fish all over N WI.
There were only a few X170s made. That ride handles fine under power but has an issue at rest with someone on the bow in 2.5' waves. |
|
| |
|
Posts: 51
| I also fish rivers a lot and have wondered how a jet boat would run in lakes? Anyone ever used a outboard jet boat on lakes? |
|
| |
|
Posts: 1724
Location: Mt. Zion, IL | A few pictures of the rear extensions before finished. I built the same for a friend’s impact.
Attachments
----------------
 14D7E004-3A55-4B04-B534-D85C1D30CA7D.jpeg (147KB - 262 downloads)
14A1383E-616B-43AB-A619-D97BCC49CFF9.jpeg (123KB - 229 downloads)
C7FA8F6C-E74B-468E-AEE1-16D0AAAA5DBA.jpeg (140KB - 206 downloads)
|
|
| |
|
| RyanJoz - 4/29/2022 10:55 AM
A few pictures of the rear extensions before finished. I built the same for a friend’s impact.
Thanks Ryan! Looks a lot like what I was thinking. Can't really tell from photo, did you leave a space for splash to flow out the drain holes? I built a deck extention last year I can take in and out but this would be nice too. |
|
| |
|
Posts: 51
| How high does a Lund 1650 ss sit above the water? Is it easy to figure eight and release fish out of? Can you fish two guys off one side both standing tight to the side?
I liked my buddies 1400 fury tiller. It was amazingly stable to fish out of. |
|
| |
|
Posts: 51
| WHat size trolling motor would you suggest for a 1650? |
|
| |
|
Posts: 32888
Location: Rhinelander, Wisconsin | Looks like it's about perfect.
Attachments
----------------
Untitled.jpg (59KB - 158 downloads)
|
|
| |
|
Posts: 1724
Location: Mt. Zion, IL | North of 8 - 4/29/2022 12:26 PM
RyanJoz - 4/29/2022 10:55 AM
A few pictures of the rear extensions before finished. I built the same for a friend’s impact.
Thanks Ryan! Looks a lot like what I was thinking. Can't really tell from photo, did you leave a space for splash to flow out the drain holes? I built a deck extention last year I can take in and out but this would be nice too.
Hard to tell, but in the 3rd pic, you can see the supports stepped and the corner relieved to allow water to flow out the drain. Here are two finished pics.
Attachments
----------------
2D0E718D-3A78-4916-9C10-C42E483FFC2A.jpeg (165KB - 204 downloads)
E367E27E-7D0E-44A2-96FF-299DC6E11DC7.jpeg (174KB - 179 downloads)
|
|
| |
|
| RyanJoz - 4/30/2022 3:25 PM
North of 8 - 4/29/2022 12:26 PM
RyanJoz - 4/29/2022 10:55 AM
A few pictures of the rear extensions before finished. I built the same for a friend’s impact.
Thanks Ryan! Looks a lot like what I was thinking. Can't really tell from photo, did you leave a space for splash to flow out the drain holes? I built a deck extention last year I can take in and out but this would be nice too.
Hard to tell, but in the 3rd pic, you can see the supports stepped and the corner relieved to allow water to flow out the drain. Here are two finished pics.
Thanks again. Don't think I will get it done for the general opener but shoot for musky opener. |
|
| |
|
Posts: 3869
| EllusiveGoose - 4/29/2022 8:48 PM
WHat size trolling motor would you suggest for a 1650?
The bigger the better (the tighter the sweater, the boys are depending on us). |
|
| |
|
Posts: 1724
Location: Mt. Zion, IL | 80 lb Terrova 60”, especially if you fish any big water. |
|
| |
|
Posts: 32888
Location: Rhinelander, Wisconsin | I have a 60" Ultrex on my 1625 Fury XL, absolutely love the motor. |
|
| |
|
Posts: 791
Location: North Central IL USA | I'm really close to the water in the cockpit of my MX 1825, but they quit making them.  |
|
| |
|
Posts: 399
Location: SW Ohio | gregk9 - 8/18/2022 10:56 PM
I'm really close to the water in the cockpit of my MX 1825, but they quit making them. :(
The front deck is pretty low as well although there are lower ones. I don’t release from the front deck, though. I net, unhook and release from the back.
sworrall - 5/1/2022 11:49 AM
I have a 60" Ultrex on my 1625 Fury XL, absolutely love the motor.
I have the 80#, 60” Ultrex on my Skeeter. Came on the boat but I have a Terrova same size as my backup. The Ultrex is a lot quicker on the turning and more intuitive coming from the older foot control models. |
|
| |
|
Posts: 791
Location: North Central IL USA | OH Musky - 8/21/2022 7:04 PM
I net, unhook and release from the back.
Yep! |
|
| |
