|
|
Posts: 54
Location: Minnesota | I have a 619 that doesn't want to read fuel level at the gauge and I cannot locate a fuse or a wiring schematic. I found sending unit and checked molec connections at gauge. I changed cranking battery and that's when issue arouse. Looking for a little insight. Thanks!! |
|
| |
|
Posts: 1767
Location: Lake Country, Wisconsin | not to scare you but I had gas gauge issues on my 619 I just sold and it was a major hassle...4 mechanics later and it still wasn't working. If you take it somewhere make sure you can get quality work, not just a guy looking to move a needle and collect a paycheck... |
|
| |
|
Posts: 163
Location: lake st clair michigan | try this site http://www.boatinghowto.com/content/troubleshooting-those-pesky-mar... |
|
| |
|
Posts: 717
Location: Grand Rapids, MI | I don't know if yours is wired the same as mine, but my fuel gauge dropped to nothing suddenly. Just dead. I found it was actually a bad solenoid for my trim/tilt. The power runs straight from the battery to the starter, then the 2 solenoids for trim/tilt, then back to the fuse panel to power the tach, fuel gauge, etc. Fixed the solenoids, and that fixed my gauge problems. |
|
| |
