MuskieFIRST | Replacing Maxxum with Terrova » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Replacing Maxxum with Terrova

Message Subject: Replacing Maxxum with Terrova

Propster

Posted 8/29/2013 8:01 PM (#660369)
Subject: Replacing Maxxum with Terrova

Posts: 1901

Location: MN

On a 690 Ranger. Will any of the Maxxum holes work or do I need to drill all new? Any tricks or tips? Haven't picked it up yet (used) so just not familiar with the base yet. Thanks

jonnysled

Posted 8/29/2013 8:28 PM (#660375 - in reply to #660369)
Subject: Re: Replacing Maxxum with Terrova

Posts: 13688

Location: minocqua, wi.

put the quick-change base plate on ... they are awesome!

Cowboyhannah

Posted 8/29/2013 9:11 PM (#660390 - in reply to #660369)
Subject: Re: Replacing Maxxum with Terrova

Posts: 1460

Location: Kronenwetter, WI

If you get one of these you can use the same holes.

http://store.minnkotamotors.com/products/647255/MKA-47_Universal_Mo...

The instructions in mine were wrong, if you get it pm me and I can advise on installation

Edited by Cowboyhannah 8/29/2013 9:13 PM

Propster

Posted 8/29/2013 11:54 PM (#660410 - in reply to #660369)
Subject: Re: Replacing Maxxum with Terrova

Posts: 1901

Location: MN

Is that the plate you are referring to as well Sled? If so I have that for my Maxxum. Didn't know it would work on Terrova as well.

Cowboy, are you saying the instruction for mounting the Terrova to this plate in the Terrova manual is incorrect?

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread