MuskieFIRST | Battery Question » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Battery Question

Message Subject: Battery Question

cast4musky

Posted 7/8/2011 7:05 AM (#506235)
Subject: Battery Question

Posts: 865

Have just switched from a 12 volt trolling mot or to a 24 volt. I just realized I have 3 different batteries, 1-deep cycle 27 series, 1-deep cycle 24 series, (standard) and 1 Cabelas AGM battery (most power). I know they have different settings on a charger...... But my question is Which two batteries can I connect to get the 24 volts I need for the trolling motor ?????? I need the third battery for engine starting and electronics. These 3 batteries are all new.. Thanks Mike

jackson

Posted 7/8/2011 7:31 AM (#506237 - in reply to #506235)
Subject: Re: Battery Question

Posts: 582

Usually you should have 2 of the same batteries (deep cycle's) to run a 24 volt system. When they are different you risk running them down at different rates. At least this is what i have learned from others.

gregk9

Posted 7/8/2011 12:06 PM (#506262 - in reply to #506235)
Subject: Re: Battery Question

Posts: 791

Location: North Central IL USA

Yeah, use the deep cycle for the troll motor; the AGM for your cranking battery. I screwed up a AGM using a regular charger on it.

cast4musky

Posted 7/9/2011 9:57 PM (#506403 - in reply to #506235)
Subject: Re: Battery Question

Posts: 865

Thanks , I am going to use the AGM for starting and the 24 series and 27 series for the Trolling motor temp. only.... Thanks

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread