MuskieFIRST | Okuma Idx 250 » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Okuma Idx 250

Message Subject: Okuma Idx 250

JimtenHaaf

Posted 3/29/2009 4:59 PM (#369068)
Subject: Okuma Idx 250

Posts: 717

Location: Grand Rapids, MI

Is the 250 levelwind supposed to move when you cast? My Idx 400 and Calcutta 400 both go back and forth when casting. The 250 only does on the retreive.

AFChief

Posted 3/29/2009 5:17 PM (#369071 - in reply to #369068)
Subject: RE: Okuma Idx 250

Posts: 550

Location: So. Illinois

I don't think so. My wife has the 250 and it does the same as you describe.

J

dougj

Posted 3/29/2009 7:12 PM (#369095 - in reply to #369068)
Subject: RE: Okuma Idx 250

Posts: 906

Location: Warroad, Mn

On most small reels of that size the level wind will not move on the cast. Need to get near the 4500 size before that happens from most reel companies. Not much need too make the level wind go back and forth on the cast on reels this small, just wears them out.

Doug Johnson

California_Muskie

Posted 3/30/2009 11:41 AM (#369215 - in reply to #369095)
Subject: RE: Okuma Idx 250

Posts: 299

Location: Ontario, California

The IDX-250 does not have a traveling levelwind. The IDX-250"A" does have a traveling levelwind.

Edited by California_Muskie 3/30/2009 11:41 AM

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread