MuskieFIRST | Lund Mr. Pike » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Lund Mr. Pike

Message Subject: Lund Mr. Pike

ghitierman

Posted 4/25/2007 4:03 PM (#252825)
Subject: Lund Mr. Pike

Posts: 284

My buddy has one and wants to get a better prop for his 90 horse merc. How do you know what to buy?

fishguide

Posted 4/26/2007 8:30 AM (#252915 - in reply to #252825)
Subject: RE: Lund Mr. Pike

try going to
Iboats.com they will have what you need.

AFChief

Posted 4/26/2007 8:54 AM (#252918 - in reply to #252825)
Subject: RE: Lund Mr. Pike

Posts: 550

Location: So. Illinois

There are many useful guides on the internet to help with Prop selection. You can do a search on "prop selection" and many useful guides will come up. The key is to find a prop that allows the engine to operate at the proper RPM level.

www.mercruiserparts.com/help_with_prop_selection.htm

http://www.slkelectronics.com/help/Eca00018.htm

VMS

Posted 4/26/2007 4:09 PM (#253003 - in reply to #252825)
Subject: Re: Lund Mr. Pike

Posts: 3480

Location: Elk River, Minnesota

Hello..

If you are willing to put up some numbers: GPS speed, RPM's, motor mounting hole you may find there are many on here who have a similar style rig. I'm guessing the prop pitch will be somewhere around a 17 pitch. A stainless prop may or may not help in this situation, but it usually will allow the motor to be moved up a couple of bolt holes which will help speed, and in some cases hole shot...plus the the efficency of the motor goes up since there is less lower unit drag.

Lots of choices on props and taking a day to test a few different ones will definitely be in order. But...one prop will stick out above the rest and in most cases it will be a hands down difference. Everything works well and when trimmed and cruising (not WOT) the boat will just seem to float along...

Steve

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread