MuskieFIRST | Ranger 618 bait well question » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Ranger 618 bait well question

Message Subject: Ranger 618 bait well question

hchad

Posted 4/1/2012 4:17 PM (#549970)
Subject: Ranger 618 bait well question

Posts: 281

The bait well will not drain. Any advice would be appreciated Thanks

wavridr

Posted 4/2/2012 7:43 AM (#550093 - in reply to #549970)
Subject: RE: Ranger 618 bait well question

Posts: 298

Location: Not where I want to be!

Check if the strainers in the well and in the transon are clear.
Then check to see if the cable is moving the valve down in the bildge. You may need two people to do this. I have had to take the valves out, take apart and clean sand and minnow debris out.

Guest

Posted 4/2/2012 10:08 AM (#550134 - in reply to #549970)
Subject: RE: Ranger 618 bait well question

Open and close the drain a few times. Leave it open. Put a garden hose up to the drain to create some water pressue. 99% of the time you'll be able to blow the clog out. Be sure to remove any screens first.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread