MuskieFIRST | Anyone have some pictures of a transducer on transom for a tuffy magnum » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Anyone have some pictures of a transducer on transom for a tuffy magnum

Message Subject: Anyone have some pictures of a transducer on transom for a tuffy magnum

ttrap

Posted 3/19/2011 8:46 PM (#487904)
Subject: Anyone have some pictures of a transducer on transom for a tuffy magnum

Posts: 279

If anyone has some pictures of where they mounted the transducer on the transom for a tuffy magnum could you please post some for me. If you want you can send them to my email at [email protected].
Thanks,
Tim Trap

sworrall

Posted 3/20/2011 9:36 AM (#487940 - in reply to #487904)
Subject: Re: Anyone have some pictures of a transducer on transom for a tuffy magnum

Posts: 32884

Location: Rhinelander, Wisconsin

Go to the bottom right on the Mag looking at the bottom of the boat (starboard) and mount the transducer on the flat between the stakes created by the pad (flat area in the middle) and first lift strake. Place a yardstick on the running surface flat to the bottom of the boat between the strakes sticking out the back, and rest the transducer in the bracket on the ruler so the bracket sits against the transom. Mark the holes, drill, add silicone sealant to the screws, and mount the transducer. Tip it down just a couple degrees on the back, and you are set.

ttrap

Posted 3/20/2011 10:56 AM (#487949 - in reply to #487904)
Subject: Re: Anyone have some pictures of a transducer on transom for a tuffy magnum

Posts: 279

Thanks a lot steve thats the info i needed.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread