MuskieFIRST | Corvalus 400 Palm Side End Cap Removal » Lures,Tackle, and Equipment

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Lures,Tackle, and Equipment -> Corvalus 400 Palm Side End Cap Removal

Message Subject: Corvalus 400 Palm Side End Cap Removal

Stein

Posted 8/15/2009 12:09 PM (#394284)
Subject: Corvalus 400 Palm Side End Cap Removal

Posts: 199

Location: Nebraska

Finally down to cleaning and lubing my last reel. Shimano Corvalus 400. Crank side is done. Really easy reel to work on so far. That is until I moved to the other side. I can't for the life of me figure out how to remove the palm side cover. On the schematic, it appears that there are two screws holding on the plastic button from the inside and that holds on the cover, but after removing the screws I failed to be able to remove the plastic disc in the center.

I must be missing something obvious. Any help?

Thanks,

PIKEMASTER

Posted 8/15/2009 1:21 PM (#394296 - in reply to #394284)
Subject: RE: Corvalus 400 Palm Side End Cap Removal

Location: Latitude 41.3016 Longitude 88.6160

ck to see if the side plate screws on ???? no other screws U see from the inside ??? GOOD LUCK

Stein

Posted 8/16/2009 11:01 PM (#394466 - in reply to #394284)
Subject: Re: Corvalus 400 Palm Side End Cap Removal

Posts: 199

Location: Nebraska

Got it. Screw hidden under gear. Thanks

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread