MuskieFIRST | Motor height » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Motor height

Message Subject: Motor height

Posted 6/14/2002 5:05 PM (#6712)
Subject: Motor height

2000 Esox Magnum Console, 75 hp Honda. How high ssould the motor be set for optimum performance? At WOT, trimed way down, shows just over 5000 rpm on the tach, 46+ mph on the X75.

Posted 6/14/2002 6:29 PM (#35691)
Subject: Motor height

Do you have a set back plate? If so I can get the exact measurement for you Monday, if not, then the motor needs to be NO MORE than 1 hole up at most, and is optimal for all conditions flat to the transom.

Posted 6/15/2002 1:56 PM (#35692)
Subject: Motor height

Thanks, Steve. Motor is on the transom. I may need to go down one pitch on the prop.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread