MuskieFIRST | Gas Gauge » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Gas Gauge

Message Subject: Gas Gauge

thescottith

Posted 8/19/2016 7:36 AM (#827825)
Subject: Gas Gauge

Posts: 444

Replaced the none functioning gas gauge in the esox mag. Now when I fill it up it indicates it is only 3/4 full? I fill it up at the station and then when I"m level in the boat, on the water not moving it only states I have 3/4 a tank. Any ideas on why?

thanks

SK

anderj85

Posted 8/19/2016 9:35 AM (#827851 - in reply to #827825)
Subject: Re: Gas Gauge

Posts: 287

Location: US

Any corrosion on the connections at the tank sending unit will increase resistance and throw off the reading. I had a similar issue, reading about 1/2 tank under and took off the connections and cleaned them up with a little steel wool and all is good. Obviously not the only possible issue but one to check for.

thescottith

Posted 8/19/2016 1:03 PM (#827880 - in reply to #827851)
Subject: Re: Gas Gauge

Posts: 444

Thanks a bunch, I will check that.

sk

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread