MuskieFIRST | Lowrance Water Temp Question » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Lowrance Water Temp Question

Message Subject: Lowrance Water Temp Question

Team Rhino

Posted 5/2/2009 10:44 PM (#375749)
Subject: Lowrance Water Temp Question

Posts: 512

Location: Appleton

I just took the boat out today and have an 28C HD unit on it. Question is I went to overlay data and went with water temp. When I did this all I could get was the screen to flash 32 degrees. I have a 520 C at the bow and that temp was working fine. Any help would be great. Thanks, Jeff

The Dogger

Posted 5/4/2009 7:21 AM (#375908 - in reply to #375749)
Subject: RE: Lowrance Water Temp Question

Posts: 215

Location: Twin Cities

When I have seen this in the past, the transducer didnt have temp capabilities. Might want to double check it. It seems that it defaults to 32 degrees when no temp is available. The best way to check this would be to swap units and see if if it stays the same at each spot, or if the 28 still reads 32 degrees at the bow.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread