MuskieFIRST | C4 to C5 conversion? » General Discussion

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> General Discussion -> C4 to C5 conversion?

Message Subject: C4 to C5 conversion?

Posted 4/10/2002 12:45 PM (#4336)
Subject: C4 to C5 conversion?

I read a post somewhere and cannot find it now. It listed the parts to use for a conversion to make a C4 into a C5. I believe by adding an extra bearing and washers, not really sure. If anyone could let me know what parts are needed and where to get these parts I would appreciate it. Also what is the cost to upgrade, worth it or not?
Thanks
Kly

Posted 4/10/2002 1:38 PM (#28880)
Subject: C4 to C5 conversion?

Kly i posted it yesterday its now on the second page. You can get the parts from Abu Garcia call thier customer service you need the c5 worm gear and the level wind shroud about $11 for the worm gear with the bearing on it and $4 for the shroud that the bearing fits into, plus a cpl of bucks for shipping. the only thing is that right now they only have the parts for the 5600 available they said they should have the parts for the 6500 in a month or so.go to www.bassfishimghomepage.com and look under the rod and reel section lots of info on this and other reels and some very knowledgable guys.

Yeti

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread