MuskieFIRST | Lund wiring issue » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Lund wiring issue

Message Subject: Lund wiring issue

Guest

Posted 4/17/2007 9:14 AM (#251155)
Subject: Lund wiring issue

I am trying to hook up a new fish finder/gps on my Lund Angler 1700 and can't get it to work. There are what looks like it should be two wires for just this on-dash set up right under the steering wheel however when I hook up to them I can't get power to the unit. The pre-wiring in the bow works perfectly. I have to believe I am hooking uo to the correct wires since they look identical to those in the bow. Anyone run into this problem with their Lund?

THROWINWOOD

Posted 4/17/2007 10:00 AM (#251162 - in reply to #251155)
Subject: RE: Lund wiring issue

Posts: 110

Location: NEW LENOX IL

Check the fuse panel for a missing or blown fuse. If all is well there put a volt meter on the wires and see if you have power there.

Good luck

Dave

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread